|
|
|
Feb 22, 2014 22:48:01 GMT
|
 ![]()
Introducing Suzie the sceptre. Bought originally over the phone without even seeing a picture of her. The plan was to break her for parts and banger race what was left. In the days that followed that plan soon changed haha she was far to good to break.
First job was to get her running which took all of 20 mins much to my delight. the previous owner had had the engine and gearbox rebuilt and had converted it with a manifold to run a 32/36 weber carb. few checks and she fired straight up and drove off the truck. next job was check all the braking system. another result, all new brakes and pipes.
right time to sort the ride height. 
before.
after with a 2" drop. |
| |
|
|
|
|
retrolegends
Club Retro Rides Member
Winging it.....Since 1971.
Posts: 3,726
Club RR Member Number: 94
|
|
Feb 22, 2014 23:04:39 GMT
|
|
Looks great! Glad you didn't race it,looking forward to more updates.
(Looks in better nick than my Super Minx).
|
| |
1974 Hillman Avenger 1500DL1992 Volvo 240SE1975 Datsun Cherry 100a flying custard1965 Hillman SuperMinx Rock N Roller1974 Austin Allegrat Mk1 1.3SDL1980 Austin Allegro Mk3 1.3L1982 Austin Allegro Mk3 on banded steels2003 Saab 9-3 Convertible 220bhp TurboNutter1966 Morris Minor 1000 (Doris) 2019 Abarth 595C Turismo (not retro but awesome fun) www.facebook.com/DatsunCherry100a |
|
|
|
|
Feb 22, 2014 23:10:48 GMT
|
now we had a nice ride height and a good running gear it was time to sort out the terrible paintwork and damage/rust repairs. luckily working in a bodyshop this wouldn't be a hardship.
bit of a session with the mop and polish for a few nights after work.
vinyl restorer applied to the webesto roof.
start of the strip down ready for the body repair. now luckily 99% of the rust/damage is in the lower half so only the cream will need to be resprayed. |
| |
|
|
|
|
|
Feb 22, 2014 23:52:32 GMT
|
unfortunately all 4 arches are like this. time to make some templates and get shaping some new arches. this takes weeks in the lead up to Christmas 
This is where I am up to at the minute. all put back together except fitting the door panels next dilemma tho is to weather get the original wheels banded to fill out those arches. what does everyone think. Banded steels painted cream fitted with hub caps or standard wheels painted cream fitted with hub caps? ? |
| |
|
|
v8ian
Posted a lot
Posts: 3,832
|
|
|
|
|
BANDED!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
|
| |
Atmo V8 Power . No slicks , No gas + No bits missing . Doing it in style.
Austin A35van, very different------- but still doing it in style, going to be a funmoble
|
|
orangecords
Part of things
yawner extraordinaire
Posts: 892
|
|
|
|
BANDED!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! What he said!!!!!! |
| |
I then wanted to start cleaning the interior as it stinks of wood (the material not the smell of a boner) best quote ever! |
|
fred
Posted a lot
WTF has happened to all the Vennies?
Posts: 2,957
|
|
|
|
|
Yup Banded
skinny wheels lost in the arches are a sad sight
left to vintage cars and pizza cutters
|
| |
'79 Cossie ran Cortina - Sold
2000 Fozzer 2.0 turbo snow beast
'85 Opel Manta GSI - Sold
03 A class Mercedes
Looking for a FD Ventora - Anyone?
|
|
|
|
|
|
|
|
il get the rims bolted back on in the morning and work out how wide I can get them banded. how much clearance would you guys suggest between lip of rim and arch lip on the rear? just thinking about any sideways give/flex in the rear leaf spring axel set up. And should I stagger the front and rear widths for that hot rod feel?
|
| |
|
|
|
|
|
|
|
BANDED AND CREAM PAINTED STEELSGet on with it then  Looks great BTW, top work, so glad you didn't race it 
|
| |
72 Pontiac Firebird Formula 400. 95 BMW E34 525i Manual. 80 Lotus Elite, sold 86 Mk4 Escort RWD V8, sold |
|
v8ian
Posted a lot
Posts: 3,832
|
|
|
|
If you are worried about the stability of the rear springs under cornering The best thing you can do to is fit a panhard bar or watts linkage, with a watts linkage it will also be easy to centralise the axle, also transform the handling, IMO, Pound for Pound the best suspension mod you can make on a leaf sprung car. With stock suspension, As your arches partially cover the wheel, Measure the clearance both sides, then jack the car up on the jacking points and check how much room there is to remove the wheel at the top, probably both sides again. without lateral location, I would think 25mm from each arch, with a watts linkage, possibly as little as 5mm, that's all I ran on my Cortina 5mm was adequate, and never touched. |
| |
Atmo V8 Power . No slicks , No gas + No bits missing . Doing it in style.
Austin A35van, very different------- but still doing it in style, going to be a funmoble
|
|
|
|
qwerty
Club Retro Rides Member
Posts: 2,419
Club RR Member Number: 52
|
|
Feb 23, 2014 15:38:47 GMT
|
|
That looks fantastic! I vote for banded black steels with chrome hubcaps. How did you lower it? Couple of coils cut up front and blocks out back?
|
| |
Last Edit: Feb 23, 2014 15:39:13 GMT by qwerty
|
|
|
|
|
Feb 23, 2014 21:40:30 GMT
|
|
Going to look into a watts linkage and probably invest in that kinda setup. Ive had a look today and could just about sqeeze a extra 2.5" on to the rear wheels. looking at a 1" band on to the front wheels. Wheels are back from sandblasters today so there being dropped of at my mates tomorrow to be banded. Mmmmmm gloss black wheels?!?!?
|
| |
|
|
|
|
|
Feb 23, 2014 21:42:11 GMT
|
|
Cream or burgundy I would have thought would look the part...
|
| |
|
|
Del
South East
Posts: 1,450
|
|
Feb 23, 2014 21:52:14 GMT
|
|
Can we have a look inside, mister?
|
| |
'I come not from Heaven, but from Essex'.
The Retro Rider formerly known as Silvermac.
|
|
v8ian
Posted a lot
Posts: 3,832
|
|
Feb 23, 2014 22:24:29 GMT
|
|
Silver or Rich Cream used to be the name on the dulux can when I was a kid, that's what we painted our wheels with then,
|
| |
Atmo V8 Power . No slicks , No gas + No bits missing . Doing it in style.
Austin A35van, very different------- but still doing it in style, going to be a funmoble
|
|
|
|
|
|
|
|
I don't think i have any pics of the interior at the moment. If its light enough when i finish work tomorrow il take a few and post them up. I think i may have to paint a couple of the wheels different colours and see what looks best. Had a fiddle with the weber before and she still wont behave. Trip to the rolling road for a tune up and a power run are on the cards me thinks. Il fit a new inlet manifold gasket and change the points and condenser first and fit new plugs as there a bit of a unknown factor. Was ment to be selling her but I'm sure i can make room for her amongst the other projects/finished cars in the workshop haha
|
| |
|
|
will
Posted a lot
Posts: 4,023
|
|
|
|
|
Top car, top color, top save, top man, well done.
I like the oe wheels on this and although a subtle band would also work feel that clean and dropped is good too. Burgundy, black wall tyres and hubcaps is the way I'd do it but hey, your car so do what you choose.
|
| |
|
|
chrisdcapri
Part of things
Avid collector of rust
Posts: 205
|
|
Feb 24, 2014 10:14:35 GMT
|
|
That's a great looking car, I can only repeat what others have already said - I'm so glad it didn't get raced and it's going to look even more awesome on banded wheels
|
| |
|
|
|
|
|
Feb 24, 2014 11:23:50 GMT
|
|
This is looking GOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOD...!!!!!!!!
|
| |
***GARAGE CURRENTLY EMPTY***
|
|
|
|
|
Oct 22, 2018 18:47:45 GMT
|
Wow this is a bit of a old dead thread but I had forgotten all about it. I've found the pics of her finished. Turned out a friend of a friend heard about it and wanted to buy it and made a offer that I couldn't turn down. Anyways I did the deed and got her mot'd and off she  |
| |
Last Edit: Oct 22, 2018 18:51:00 GMT by 666coward
|
|
|
|
?
