I`ve got an early Pajero with the 2.5TD engine in for breaking at the minute. I`ve sold the engine to a chap in London, who needs it ASAP, but I`m struggling to get it out! 
So, most of the work is done, all the hard to access bolts on the bellhousing are off, but there is one towards the bottom of the bellhousing that is stuck! I can`t get it to move at all.
My next idea was dropping the engine and box together, and then have better access to the offending bolt. However, this would mean dropping the front and maybe rear axles.
It gets better, as I don`t have a lift, and work in a drafty lock up with gravel/oil on the floor!
So, if anyone is local enough tyo make the trip, and fancies earning a bit of beer money anytime over the next few days, please let me know.
Cheers
So, most of the work is done, all the hard to access bolts on the bellhousing are off, but there is one towards the bottom of the bellhousing that is stuck! I can`t get it to move at all.
My next idea was dropping the engine and box together, and then have better access to the offending bolt. However, this would mean dropping the front and maybe rear axles.
It gets better, as I don`t have a lift, and work in a drafty lock up with gravel/oil on the floor!
So, if anyone is local enough tyo make the trip, and fancies earning a bit of beer money anytime over the next few days, please let me know.
Cheers
