|
|
Dec 12, 2013 15:04:56 GMT
|
Does anybody have the material list that "tonybmw" produced for his home made metal bender he used during his blogs on the victor build. I have tried to locate it, found the link, but it seems to have been removed. I am annoyed with myself for not noting the list when I read it but his builds are so good that I just had to read all of his efforts. I would be very grateful if somebody can help. Cheers. Grandadio
|
|
|
|
sal
Part of things
Mk2 Cavalier CD
Posts: 240
|
|
Dec 12, 2013 20:03:12 GMT
|
It's on page 3 of the "making panels" thread. I can't link it as I'm posting from my phone.
|
|
|
|
|
|
Dec 13, 2013 19:38:47 GMT
|
You wont believe this but I spent a couple of hours the other night re-going over all of his posts and could not find it. In particular I read through the "making panels" one about 3 times and it did not show. That is where his link in the Victor post took me. And yet tonight there it is!! Bloody computers!!!! Thanks for your help.
|
|
|
|
sal
Part of things
Mk2 Cavalier CD
Posts: 240
|
|
Dec 13, 2013 20:37:41 GMT
|
No probs mate. I knew roughly where it was as I built one myself not long ago. I used slightly smaller angle as that's what I had laying around but does the job well.
|
|
|
|