|
|
|
Nov 20, 2013 20:16:15 GMT
|
Hi folks I am looking for a supplier for fittings to go on the end of a bowden control cable which operates the heater valve on my mk2 Jag. I'm not sure what type of fitting I need, so a cooperative supplier - or an old fashioned shop (in the South East) would be useful. Any suggestions? cheers Cortinaman  |
| |
Old Fords never die they just go sideways
|
|
mantamutilator79
Part of things
I love the smell of kerosene in the morning….
Posts: 160
|
|
Nov 20, 2013 20:28:42 GMT
|
|
Hi Cortinaman,
Try Speedy Cables (www.speedycables.com) or 01639 732213. They used to be based in London but are now in Swansea. I used them in the past for a LT77 gearbox to Manta speedo ferrule for my V8 conversion. They also advertise in Custom Car magazine.
Regards,
Pete
|
| |
|
|
|
|
|
Nov 20, 2013 21:33:05 GMT
|
|
exactly who I was thinking about when I read the first post, seen them about for years though never used them myself.
|
| |
|
|
|
|
|
Nov 20, 2013 21:42:50 GMT
|
|
Any proper old school motorcycle shop should have most fittings on the shelf for making up your own cables.
|
| |
|
|
|
|
|
|
|
|
Thanks for the pointers chaps. I'll give speedy cables a try - and there is a motorbike shop down the road from work which has been there for about 60 years - so I'll give them a go as well.
cheers
Cortinaman
|
| |
Old Fords never die they just go sideways
|
|
