ScORTED
Part of things
ITBs = Bwaaaarp
Posts: 427
|
|
|
I'm going to break my MX5 as I don't want to get the drivers sill repaired despite 3 months MOT list updated 24/11/13 See below for list and pics Collection is preferred fro- Lincolnshire. [*]Anything the post office take I will post at cost plus a few quid to cover packing.[/*] [*]Can deliver if my fuel costs are met - or i'll cover them if you buy plenty of stuff.[/*] [*]I don't do dibs,first to pay gets it honestly if your desperate for a parnd i'll generally get straight back to you[/*]
|
|
Last Edit: Jun 16, 2020 21:16:10 GMT by ScORTED
"In engineering there is an answer to everything, It's just that we're usually too ignorant or too dim to see it." Keith Duckworth If you'd binned it into something that either didn't move, or survived intact (like I did, well, technically I landed on top of it, skillzorz...
|
|
|
|
|
How much for the 6 speed and torsen?
|
|
Ginetta G15 BMW K1100 conversion Sold Mk1 Mx5 on ITB'S Sold TVR Chimaera 400 supercharged MR2 Red Roadster 2ZZ Bee*R 324 Skyline 95 Cherokee Jeep
|
|
ScORTED
Part of things
ITBs = Bwaaaarp
Posts: 427
|
|
|
How much for the 6 speed and torsen? As above they'll be available once I've sold the parts listed.
|
|
"In engineering there is an answer to everything, It's just that we're usually too ignorant or too dim to see it." Keith Duckworth If you'd binned it into something that either didn't move, or survived intact (like I did, well, technically I landed on top of it, skillzorz...
|
|
ScORTED
Part of things
ITBs = Bwaaaarp
Posts: 427
|
|
|
updated
|
|
"In engineering there is an answer to everything, It's just that we're usually too ignorant or too dim to see it." Keith Duckworth If you'd binned it into something that either didn't move, or survived intact (like I did, well, technically I landed on top of it, skillzorz...
|
|
|
|
|
Hi matey.
Any idea if the front strut brace will fit a Mk1? If so, how much you looking for?
|
|
|
|
ScORTED
Part of things
ITBs = Bwaaaarp
Posts: 427
|
|
|
For reference it fit with a little fettling, i sold it to a mk1 owner at the weekend
|
|
"In engineering there is an answer to everything, It's just that we're usually too ignorant or too dim to see it." Keith Duckworth If you'd binned it into something that either didn't move, or survived intact (like I did, well, technically I landed on top of it, skillzorz...
|
|
|
|
|
No worries matey. Cheers for the info
|
|
|
|
ScORTED
Part of things
ITBs = Bwaaaarp
Posts: 427
|
|
|
No worries.
I'm off to nuneaton on Saturday if anyone wants any of the bits listed above.
|
|
"In engineering there is an answer to everything, It's just that we're usually too ignorant or too dim to see it." Keith Duckworth If you'd binned it into something that either didn't move, or survived intact (like I did, well, technically I landed on top of it, skillzorz...
|
|
ScORTED
Part of things
ITBs = Bwaaaarp
Posts: 427
|
|
|
list updated 24/11/13 parts not listed are probably available plug and play Kenwood uprated mk2 / 2.5 speakers with adaptors and tweeter wiring looms £20 Complete functioning air con mk2 setup includes, compressor, aircon rad, aircon fan, hard pipes and the heat exchanger for in the car. (can include the heater panel if someone can tell me how to seperate it from the dash £60Door cards with screws etc £25 pair i38.photobucket.com/albums/e105/escortstreetracer/mx5rs/parts/IMG_20131114_202041_zpsf97d30c6.jpgJDM Roadster polished sill plates £25 pair Complete JDM mk2 unchipped lock set two keys (both the same) one genuine Mazda with key number £50 posted Complete JDM mk2 car loom uncut and labelled £50 JDM 6 o clock dials £40 JDM ECU £40 Centre console covered with black suede /silver stitched arm rest hand brake gaiter and gear gaiter £25 i38.photobucket.com/albums/e105/escortstreetracer/mx5rs/City_of_Kingston-upon-Hull-20120226-00123.jpguk single din cubby / clock £7 standard side repeaters £7 pair or £3.50 each Mk2 dash with glovebox, vents and screw covers £25 Mk door handles £15 each Mk2 top mounts £40 Mk2 electric mirrors GWO £40 mk2 front non abs hubs £20 each mk2 fuel flap £10 Starter motor and alternator £20 each Heater blower, Air flow sensor (MAS MAF) £10 Header tank, bonnet catch and washer bottle with pump £5 each baby teeth, foot rest and bonnet hinges £2.50 each rad brackets £2 both 3 off MAXXIS ZR9 road legal semi slicks 2 road legal 1 probably not £65 Rear lights, two passenger, one drivers with fog conversion £15 each pair of Mk2.5 Cloth Seats - foamectomied for extra head room £100 UK 1.8iS intake snorkle £5 Rear subframe with wishbones + hubs provisionally sold Ol Roll Bar project M Retro type single hoop roll bar "batchelor bar", this is made of proper CDS and is 10mm taller than most roll bars £150 provisionally sold deposit taken N
20 off blue coated steel wheel nuts - most are scuffed / scratched £15 provisionally sold deposit taken N
JDM airbox + crossover + HKS panel filter £30provisionally sold deposit taken N I am definitely keeping the LSD / prop / shafts for my other mx5
J spec <80k 1.8 BP4W engine in great condition - sold to Iso
6 speed gearbox - sold
mk2 rocker cover powdercoated bright green complete with stainless bolts - £40 with standard camcover in exchange - Iso
Mk2 genuine mazda soft top on frame water tight, one minor repair and some tiny cracks along edge £70It looks a little crease but it had been folded down for a couple of months when i put it up in the cold garage.
Mk2 stainless back box, year old no longer shiney, on a standard mk2 centre section is less than 85db on track noise tests so no problems doing track days ever £50
Bilstein Shocks and Springs
Front Bumper
Air guide
NS passenger wing
OS drivers wing
Headlights
Bonnet
Undertray
Deep dish suede steering wheel + boss modified for mk2 to retain clockspring & indicator cancelling function £45
K&N panel filter for mk2 / mk2.5 boxed as new £26 posted
Mk2 Alloy rad & silicone rad hoses - both brand new £120 posted
K&N Typhoon induction kit - £100
Tatty as curse word Sparco fixed bucket seat ideal for drift / project- red(ish) £20
4 off Lightweight Enkei mk2 RS wheels powdercoated silver - some kerbing fitted new valves, balenced as new 195/50/15 FEDERAL 595 RSRs £300
JDM RS/VS adjustable front strut brace £45
mk2 Nardi leather 6 speed knob good condition £20Collection is preferred from [*]Anything the post office take I will post at cost plus a few quid to cover packing.[/*] [*]Can deliver if my fuel costs are met - or i'll cover them if you buy plenty of stuff.[/*] [*]I don't do dibs,first to pay gets it honestly i [/LIST]
|
|
Last Edit: Jun 16, 2020 21:18:52 GMT by ScORTED
"In engineering there is an answer to everything, It's just that we're usually too ignorant or too dim to see it." Keith Duckworth If you'd binned it into something that either didn't move, or survived intact (like I did, well, technically I landed on top of it, skillzorz...
|
|