|
|
Aug 21, 2013 10:01:05 GMT
|
bought these cos Ive always wanted hydros but no bay window to put them on and wanted to adapt but haven't got the know how, got told these were 2 pump 4 dump which means they make the car 3 wheel .ive got 4 reds struts, two reds American pumps, 4 solinoids. switches and the hose..... all off a vw bay window van ive been told, done a bit of research and the reds hydrolics company are still trading in the usa and all the legs look like there products as well I haven't tested them and don't know where to start to even try so would be sold as seen I'm afraid... I can send pictures via phone. would like these collected as well as the pumps are to heavy to post. price wise I'm looking for around £400 as I paid close to that. thanks for your time people
|
|
Last Edit: Oct 9, 2013 21:40:50 GMT by crazycol
|
|
|
|
Aug 21, 2013 14:41:06 GMT
|
where you based
|
|
|
|
|
|
Aug 21, 2013 20:18:16 GMT
|
Sheffield s9
|
|
|
|
|
|
Aug 22, 2013 11:56:48 GMT
|
hi ive got a couple of question in the pic in how much is it worth is this everything there is. have you any info on the bus it came off and why. if I was to replace my shocks on my van for these the bus would not sit any lower due to the rear torsion bar and front leaf springs being fixed I could raise the bus but wouldn't sit any lower than it is now. does it come with any of the parts to make the rear torsion bars and front leaf spring free to move cheers
|
|
|
|
|
|
Aug 22, 2013 12:27:58 GMT
|
tempting, can you send me some closer pics on the shocks, showing top and bottom connections. O7838182O86 cheers
|
|
|
|
|
|
Aug 22, 2013 15:02:14 GMT
|
yes this is all ive got. they said it came off a bus that was imported from the us but wanted to put it bk to a camper but there was no where to put the pumps. because of my limited knowledge I dint ask may questions but I suppose with the torsion bar don't you just drop the spindles?
|
|
|
|
|
|
Aug 22, 2013 15:30:45 GMT
|
I could fit adjustable spring plates at the back and drop spindles at the front to get it low then fit your kit to pump it up but the spring plates cost £219 and drop spindles are £500 all in this is more than I want to spend so will have to give your kit a miss I was hoping you mite of had the extra bits good luck with the sale cheers
|
|
|
|
|
|
Aug 22, 2013 15:33:51 GMT
|
no worries mate got tons of people asking and had 1 person come and view but his offer was to low so I wasn't giving it away lol.
pictures sent
|
|
|
|
|
|
Aug 22, 2013 16:00:41 GMT
|
Thanks for pics, looking at transport options and will come back to you shortly.
|
|
|
|
|
|
Aug 22, 2013 19:27:05 GMT
|
Where are you located bud as i tend to travel with work
|
|
|
|
|
|
Aug 22, 2013 19:54:56 GMT
|
Shrewsbury, shropshire area
|
|
|
|
|
|
Aug 22, 2013 22:15:27 GMT
|
not going past that way for a while I'm afraid
|
|
|
|
|
|
|
Aug 24, 2013 10:37:09 GMT
|
Wouldn't be difficult for someone with a bit of fabrication skills to mod this to fit pretty much any car. If I had the spare money I would of been all over this for my sierra, had some on a polo a couple of years back and had a lot of fun with them
£400 isn't a bad price imo, I sold my setup for a little over £500 and that was just a one pump setup
|
|
|
|
|
|
Aug 25, 2013 15:29:30 GMT
|
thanks roccoguy
|
|
|
|
|
|
|
no 1 want these?? mite have to put it on tru riderz then. 1 last push
|
|
|
|
|
|
Sept 4, 2013 23:35:44 GMT
|
BuMp
|
|
|
|