1958 Hillman Minx
1390cc
24,000 miles
Recently serviced
Tax free
£1800ono
On the road and ready to drive
Good evening all
Thankyou for taking a look, here is my 1958 Hillman Minx.
Its a Series II 1390cc, which we came across in a barn around 2 years ago when we went to look at a Morris Minor... I was immediately drawn to the car, on closer inspection the car was incredibly solid for a something that had been stood in a barn since 1988 (23 years at the time)
So we bought the car from the 2nd owner, and arranged for it to be collected. Two years later the car is now on the road and drives very well.
More info can be found on the car by following the link below:
retrorides.proboards.com/thread/108125/1958-hillman-vintage-petrol-photos
The car has very low mileage of 24,000 miles (I will confirm this tomorrow), which is believed to be genuine, although unfortunately we cannot prove this.
The car is very solid, but could do with a fresh coat of paint and tidying around the edges.
Thanks for taking the time to read this, and please feel free to PM me if you have any further questions.
Matt
1390cc
24,000 miles
Recently serviced
Tax free
£1800ono
On the road and ready to drive
Good evening all
Thankyou for taking a look, here is my 1958 Hillman Minx.
Its a Series II 1390cc, which we came across in a barn around 2 years ago when we went to look at a Morris Minor... I was immediately drawn to the car, on closer inspection the car was incredibly solid for a something that had been stood in a barn since 1988 (23 years at the time)
So we bought the car from the 2nd owner, and arranged for it to be collected. Two years later the car is now on the road and drives very well.
More info can be found on the car by following the link below:
retrorides.proboards.com/thread/108125/1958-hillman-vintage-petrol-photos
The car has very low mileage of 24,000 miles (I will confirm this tomorrow), which is believed to be genuine, although unfortunately we cannot prove this.
The car is very solid, but could do with a fresh coat of paint and tidying around the edges.
Thanks for taking the time to read this, and please feel free to PM me if you have any further questions.
Matt