|
|
|
|
|
just wondered if anyone knew of some wheels that would fit on this? they are 12" 145 70 but id like to get some 13" alloys to fit it,nothing too wide!! .I seem to remember theres a list showing various offsets and widths somewhere? got to be off something reasonably common as i probably wil be getting them off ebay or from a scrappie heres a couple of pics anyhow   |
| |
|
|
|
|
|
|
|
|
|
|
If you’ve got access to the car dare I suggest measure it? I reckon it’ll either be 114.3mm or 100mm*, a quick measurement from centre-to-centre of the studs opposite each other should make it clear whether it’s one or the other. 100mm probably has more cheaply available options here, especially for FWD.
Looks like they have a lot of offset and sit out well in the arches, so I can’t imagine you’ll fit something that’s RWD-ish with reduced/zero offset (but doubtless Rmad, Daihatsu specialist Hirst or somebody will post pic’s of something in Japan suitably crazy!).
Looks a tidy car. I’m sure I read a review of it once that described it as looking like a felled telephone box, which made me laugh then and still does 20 years later.
*No guarantees, Mazda and some small Toyota are different.
|
| |
|
|
|
|
|
|
|
According to this site it's 4x100. Although the info on that page looks sketchy - they have a pic of a Daewoo instead of a Daihatsu, and it's all in Russian! If it is 4x100, the wheel world is your oyster really! |
| |
|
|
|
|
|
|
|
A set of 10x13" ATS Classics in ET 0 perhaps? ;D On a more serious note, 7 or maybe 8x13"`s would look nice  |
| |
|
|
|
|
|
|
|
|
i forgot to mention id measured the gap between the wheel studs,they are 114mm then def not 100
anyone got anything that might fit they want to sell>??
I'm sw london surrey
ta
matt
|
| |
|
|
|
|
|
|
|
|
114 ? thats no bad thing
you just need to keep your eyes peeled for a bargain
|
| |
 SPLIT RIMS ARE FOR WINNERS |
|
|
|
|
|
|
|
yup but most listings don't even mention the offset or the wheel stud size, i was hoping someone might know of some that would fit on.just a set of alloys almost the same width or slightly wider would do
I'm not trying to get really wide rims or anything,its either this way or a set of nasty aftermarket plastic hubcaps as the original ones are no longer available
|
| |
|
|
|
|
|
|
|
|
have a look in 'features' for the pcd thing
it'll tell you all you need to know
|
| |
SPLIT RIMS ARE FOR WINNERS |
|
|
|
|
|
|
|
Charades are 4x110 and I'll bet Domino's are the same. The good news is you can use Ford rims with wobbly bolts if all else fails. 110 is not a common fitment unfortunately.
|
| |
1962 Datsun Bluebird Estate - 1971 Datsun 510 SSS - 1976 Datsun 710 SSS - 1981 Dodge van - 1985 Nissan Cherry Europe GTi - 1988 Nissan Prairie - 1990 Hyundai Pony Pickup - 1992 Mazda MX5
|
|
|
|
|
|
|
Charades are 4x110 and I'll bet Domino's are the same. The good news is you can use Ford rims with wobbly bolts if all else fails. 110 is not a common fitment unfortunately. Phew, glad I put that footnote in my comment! 110mm is that odd size that some Mazda and old, small Starlets use isn't it? The one that causes Michiel problems?! |
| |
|
|
|
|
Hirst
Posted a lot
This avatar is inaccurate, I've never shaved that closely
Posts: 3,930
|
|
|
|
|
HNGGGHHHH!!
An educated guess says they will be 4x110. It is pretty difficult to get wheels in this fitment in the UK, you will likely need to import from Japan. My two Miras are 4x110 and I can't get anything either without hassle.
What I would do is respray the steel wheels in gloss black, I bet that'd look pretty smart. Congratulations on having a Daihatsu, though!
|
| |
|
|
|
|
|
|
|
I'm going to look at some 12" wheeltrims today! if they look a bit nasty i might well be tempted to spray these not sure about black though i was going to re do them in silver u think black would look better?? its going to be up for sale in a couple of weeks anyhow once ive driven it about a bit its just reached 100 miles this morning all around town short journeys on £10 of petrol so i think its going to be cheap to run  its only just run in i guess as its almost about to hit 33k miles ! its a bit like a sewing machine on sterioids though but a right laugh to drive and surprisingly nippy ! |
| |
|
|
|
|
|
|
|
|
Ah, the blasted 4x110 pcd again... welcome to the club! I've got a set of Mazda RX-7 wheels (or is that a problem for you with them being meant for rwd?) in the back of me car, just waiting for the current tyres to disintegrate (I guess somewhere in 2018, they're pretty new and I only did some 500 miles in 10 months) so I have a good reason to fit them ;-)
|
| |
|
|
|
|
|
|
|
|
A few Hondas run 4x110 IIRC
|
| |
Skyline: 1963 - 1973 - 1983
Sunny: 1982
450SLC: 1973
Navara: 1992
Gloria: 1992
|
|
|
|
|
|
|
why not get the drums redrilled into a desirable pattern then the wheel world will be your lobster  |
| |
SPLIT RIMS ARE FOR WINNERS |
|
|
|
|
|
|
|
Do the old silver rim/black centre trick.
|
| |
|
|
|
|
|
|
|
|
just get them widened
|
| |
SPLIT RIMS ARE FOR WINNERS |
|
|
|
|
|
|
|
Or have them re-rimmed into wider outers...
*n
|
| |
Top grammar tips!
Bought = purchased. Brought = relocated
Lose = misplace/opposite of win. Loose = your mum
|
|
RetroMat
Posted a lot
Column Shifting!
Posts: 3,444
|
|
|
|
|
|
| |
Last Edit: Mar 3, 2007 18:13:15 GMT by RetroMat
|
|
[*]
