rysz
Club Retro Rides Member
Posts: 2,554
|
|
|
Hi there, I am looking to possibly purchase some wheels, only issue is that one of them has a nasty kerb ding in it. It appears to be still keeping air, I am just not sure how it could be repaired or what the cost involved would be. Here is a pic of the damage: Any thoughts? Are they safe to run with this kind of damage? Thanks. Rysz.
|
|
|
|
|
|
|
I would happily drive on that, as long as it doesn't leak.
|
|
|
|
|
|
|
Piece of wood against it and hit with a lump hammer whould knock that out. Done it numerous times on wheels I've bought in the past
|
|
|
|
hairymel
Club Retro Rides Member
avatar by volksangyl
Posts: 1,081
Club RR Member Number: 207
Member is Online
|
Damage on alloy wheel rimshairymel
@hairymel
Club Retro Rides Member 207
|
|
Piece of wood against it and hit with a lump hammer whould knock that out. Done it numerous times on wheels I've bought in the past done this a successfully a few times on cheap alloys but the time i bashed a small dink out on a 10x15 revolution the rim split
|
|
whats that burning smell?
oh curse word :-(
|
|
|
|
|
Piece of wood against it and hit with a lump hammer whould knock that out. Done it numerous times on wheels I've bought in the past i do just that but only after ive heated the flatspot with a blowtorch for 5 mins
|
|
90 mk2 astra ragtop project
98 mitsi legnum vr4
98 red mitsi super legnum vr4
98 silver mitsi super legnum vr4
92 mk 1 clio (dead) awaiting new engine
93 mazda lantis type R auto
94 mazda lantis type R manual
98 red mazda 323f 1.5
|
|
g40jon
Posted a lot
Posts: 2,569
|
|
|
Piece of wood against it and hit with a lump hammer whould knock that out. Done it numerous times on wheels I've bought in the past I do just that but only after ive heated the flatspot with a blowtorch for 5 mins deffo heat the are up first, especially as it is pretty cold at the mo. don't get it too hot, just warm enough that it is uncomfortable to touch. do it with the tyre on, it'll help when hammering the lip back
|
|
|
|