I'm off to look at some Alfa wheels tomorrow with the idea of fitting them on my Lada. They're 4x98 but I was wondering if anyone could shed any more light on them, like centre bore and offset?
My Lada has a centrebore of 58.5 and an offset around 35-38.
This is one of the wheels in question:
I know I'll have to at least grind off the locating pins from my hubs, I'm just wondering if I'll need spigot rings (and what size if so) or if I'll have to break the sandpaper/flapper wheel out on the centrebore!
My Lada has a centrebore of 58.5 and an offset around 35-38.
This is one of the wheels in question:
I know I'll have to at least grind off the locating pins from my hubs, I'm just wondering if I'll need spigot rings (and what size if so) or if I'll have to break the sandpaper/flapper wheel out on the centrebore!
they are from a 1979 Alfetta GTV and look ace. However my wheel bolts are no where near long enough! curse word... hunt for longer bolts begins.