white stone chip.

ive used it on my polo il drag out a pic, its no like a rough surface it goes on smooth finish il get back to you with a pic

here ya go



it basically sprays on just like normal spray paint really easy to use

people who live in stonehouses shouldnt use stonechip ;D ;D

I've used the grey and black loads over the years. It doesn't leave a very textured finish but it's fairly hardwearing and definitely seals a lot better than any other aerosol paint. I use it on stuff I'm tarting up or over MOT welding repairs, but if I was sorting something properly I'd use U Pol Gravitex. It comes in white too and apparently stays white pretty well.



6 tins off ebay are £35, plus a gun at about £10. 6 cans will probably cover the entire underside of the car, If you are just doing the wheelarches two bottles will probably suffice.

You'll need a compressor and a shultz gun to spray it, but it leaves a really good OE looking rubberised finish that you can paint over if you need to, infact if you use 2k you don't even need to let it dry before overcoating with paint.

Each coat is probably 2mm thick - you'd need about half a dozen good coats of the aerosol stuff to match that.