Managed to change the trackrod ends and balljoints this weekend. It's previously had new wishbones and it was also lowered on coilies. The camber and tracking are ALL OVER THE PLACE.
I'm in the Black country (wednesbury-ish) and the place I usually use doesn't do camber. I could have a crack at the camber myself but if it ain't too expensive, I'll get the lot done in one go.
I ideally want to stay away from places like Kwik-fit, I just need it sorting, no sellup, no jargon, no "we use state of the art decepticon laser sighted tracking beams etc"
So does anyone have any recommendations in my area? Not Brum though, too much of an
ache.
I'm in the Black country (wednesbury-ish) and the place I usually use doesn't do camber. I could have a crack at the camber myself but if it ain't too expensive, I'll get the lot done in one go.
I ideally want to stay away from places like Kwik-fit, I just need it sorting, no sellup, no jargon, no "we use state of the art decepticon laser sighted tracking beams etc"
So does anyone have any recommendations in my area? Not Brum though, too much of an
ache.
