|
|
|
|
|
as above  |
| |
|
|
|
|
|
|
|
|
|
|
4x101
|
| |
Last Edit: Dec 6, 2006 22:40:27 GMT by Thrasher
|
|
|
|
|
|
|
next q, as above again |
| |
|
|
|
|
|
|
|
|
hmm, yeah, 101 is like near the same as 101.6. cockles
|
| |
|
|
|
|
|
|
|
hmm, close, but not the SAME......  |
| |
|
|
slater
Club Retro Rides Member
Posts: 6,390
Club RR Member Number: 78
|
|
|
|
|
101 is 101.6 well attualy its 4" that is 101.6 you wont find any 101.0 pcd cars!
Didnt you ask this question the otherday??
|
| |
Last Edit: Dec 7, 2006 6:43:38 GMT by slater
|
|
|
|
|
|
|
|
I think it was Tigran asked? I forget. The answers and arguments are about the same whoever is asking...
attempting to force the wheel onto a "close" PCD using the stock nuts or bolts will lead to failure. Several members here can vouch for this on personal experiance with the 100mm/4" PCD conflict.
Several people mentioned "wobble" bolts/nuts although I don't recall anyone claiming personal experiance of using them.
A couple of people mentioned getting an engineer or other capable person to assess the wheels and see if the lug holes could be enlarged. This may require crush washers when you fit them back on the car (ala unilug wheels). This can work well but needs to be done properly.
Might have just been me mentioned the option of getting your hubs restudded to a more common PCD such as 100mm or 4.25" I know a few peoplw who have done this.
Another option is adapter-spacers. Would probably need to be custom made for your application though.
|
| |
Last Edit: Dec 7, 2006 8:49:26 GMT by akku
1937 Austin Street Rod - 1941 Wolseley Not Rod - 1956 Humber Hawk - 1957 Daimler Conquest - 1966 Buick LeSabre - 1968 Plymouth Sport Fury - 1968 Ford Galaxie - 1969 Ford Country Squire - 1969 Mercury Marquis - 1970 Morris Minor - 1970 Buick Skylark - 1970 Ford Galaxie - 1971 Ford Galaxie - 1976 Continental Mark IV - 1976 Ford Capri - 1976 Rover V8 - 1994 Ford Fiesta
|
|
|
|
|
|
|
|
4" PCD wheels shouldn't be too hard to find (Mni, Midget, Minor, Viva etc) and general concensus on here backed up with several examples is that you should NOT use 100mm wheels. It seems that 'wobble' bolts may be the answer but I've had no experience personally.
I'd hold out for some 4"ers.
|
| |
|
|
|
|
|
|
|
101 is 101.6 well attualy its 4" that is 101.6 you wont find any 101.0 pcd cars! Didnt you ask this question the otherday?? yah i did then i found a set of revo's on ebay from an imp which i was then told above were 101mm... THEN i remembered the consensus from the other day! after editing the title like a dweeb rmad... i'll hold out for some 4x100 lol, why oh why can i not find any form of dish whatsoever 13-15inch 4x100 with big hub opening? ok ok i can but not under £100 the set, and the car only cost £150 like... |
| |
|
|
|
|
|
|
|
|
Sorry, I thought you were after Imp wheels! What car do you want to fit them on?
|
| |
|
|
|
|
|
|
|
|
|
|
favorit
still wnt a black roofrack too
|
| |
|
|
|
|
|
|
|
|
100mm wheels should be easy peasy to find since theres about a gazzilion cars fitted with them from BMWs to Hondas to Vauxhall-Opels....
|
| |
1937 Austin Street Rod - 1941 Wolseley Not Rod - 1956 Humber Hawk - 1957 Daimler Conquest - 1966 Buick LeSabre - 1968 Plymouth Sport Fury - 1968 Ford Galaxie - 1969 Ford Country Squire - 1969 Mercury Marquis - 1970 Morris Minor - 1970 Buick Skylark - 1970 Ford Galaxie - 1971 Ford Galaxie - 1976 Continental Mark IV - 1976 Ford Capri - 1976 Rover V8 - 1994 Ford Fiesta
|
|
|
|
|
|
|
why oh why can I not find any form of dish whatsoever 13-15inch 4x100 with big hub opening? ok ok I can but not under £100 the set, and the car only cost £150 like... Supply and demand!  |
| |
|
|
|
|
|
|
|
Seek hard enough and ye shall find. They are out there, just have to persevere. In the mean time, some 15in BBS as fitted to 3-series BMW's would go down a treat, esp. if you got jiggy with some detailing on them. You can regularly find sets for £50 if you try  |
| |
|
|
|
|
|
|
|
|
i've been trying 2 months since got the car!
|
| |
|
|
