|
|
|
Jun 29, 2012 13:14:01 GMT
|
|
chaps
if i rub down a certain area / filler it and then spray paint some primer over it.. and can see through the paint further filler is required.. do i need to rub it all back to filler again or can i just slap further filler over the primer?
Cheers
|
| |
Current retro - 1996 Alfa Romeo GTV / Daily - 2016 Nissan Qashqai
Previous retros - Prelude, Integra, XR2s, XR3s, Orions, CRXs, Sylvia S12, S13, Pulsar, ZX 16v, 205 Gti, MX5, MR2 etc
|
|
rodney
Posted a lot
https://www.facebook.com/RD-vehicle-transport-and-recovery-services-525622614268010/
Posts: 1,677
|
|
Jun 30, 2012 13:53:16 GMT
|
|
just scuff it and add more filler as needed,.
|
| |
facebook: rodney dean / rd transport  |
|
|
|
|
|
|
|
Great cheers mate
|
| |
Current retro - 1996 Alfa Romeo GTV / Daily - 2016 Nissan Qashqai
Previous retros - Prelude, Integra, XR2s, XR3s, Orions, CRXs, Sylvia S12, S13, Pulsar, ZX 16v, 205 Gti, MX5, MR2 etc
|
|
|
|
|
|
|
|
When you do the filler work and think your close to done just dust a guide coat over it and block it down this will show up any imperefections in the area once they have all gone coat with a good quality primer wet flat that back 600-800 grit wet and dry then paint
|
| |
|
|
