1600 xflow starter motor woes - help please

LastMinuteMotorsport Part of things Posts: 319	1600 xflow starter motor woes - help please LastMinuteMotorsport @onecam8ohv
	Jun 20, 2012 11:03:12 GMT Select Post Deselect Post Link to Post Back to Top
	Hi folks, wonder can anyone shed some light on an issue I'm having. My starter on my 1600 xflow mk2 is staying on constantly when I start the engine, and it will continue to run even after I switch ign off, I need to disconnect the battery to stop it. There is constantly 12v going to the starter. I've cleaned the starter etc, seems to be working smoothly. So I'm thinking starter solenoid? Would this be common? Seems like it may be stuck on ? Any ideas people? Cheers
	Why you always bring me junk!

	Reply Quote

bortaf Posted a lot Posts: 4,549	1600 xflow starter motor woes - help please bortaf @bortaf
	Jun 20, 2012 11:28:08 GMT Select Post Deselect Post Link to Post Back to Top
	Check there isn't 12V all the time at the solenoid exciter wire, the ign switches can burn out as well as the solenoids, otherwise change the solenoid they are around a tenna on the bay
	R.I.P photobucket

	Reply Quote

LastMinuteMotorsport Part of things Posts: 319	1600 xflow starter motor woes - help please LastMinuteMotorsport @onecam8ohv
	Jun 20, 2012 12:41:10 GMT Select Post Deselect Post Link to Post Back to Top
	good idea actually, didnt think of that at 11.30 last night,cheers will do!
	Why you always bring me junk!

	Reply Quote