Wheel Stud Problem | Retro Rides

aij29 Part of things Posts: 639	Wheel Stud Problem aij29 @aij29
	Jun 11, 2012 13:51:09 GMT Select Post Deselect Post Link to Post Back to Top
	Hi Guys My Daihatsu Hijet (110 pcd) has been running Ford 108 Pcd wheels for about 4 years without wobble bolts, But its recently started breaking studs so I thought i`d sort it out properly by buying longer studs and wobble nuts, I`ve fitted 20mm longer studs which have been properly press fitted into the hubs but now the wheels don`t fit over the studs at all, HELP!!! Cheers Adrian
	Last Edit: Jun 11, 2012 13:52:11 GMT by aij29

	Reply Quote

v8ian Posted a lot Posts: 3,832	Wheel Stud Problem v8ian @v8ian
	Jun 11, 2012 14:31:17 GMT Select Post Deselect Post Link to Post Back to Top
	There is a possibility that one or two studs have gone in on the p-ss if they are, this could result in the wheel catching on the stud, one way to get the studs straight, is drop a socket over the stud, making sure the socket is seated flat on the hub, run the wheel nut against the socket and pull reasonably tight, this Should pull the stud square if its done correctly,
	Atmo V8 Power . No slicks , No gas + No bits missing . Doing it in style. Austin A35van, very different------- but still doing it in style, going to be a funmoble

	Reply Quote

aij29 Part of things Posts: 639	Wheel Stud Problem aij29 @aij29
	Jun 11, 2012 15:24:34 GMT Select Post Deselect Post Link to Post Back to Top
	Hi Thanks for your reply, My mate press fitted the studs with a fly press as they were extremely tight so they should have gone in straight but i`ll try the socket idea just to be sure Adrian


	Reply Quote

mattfletcher Part of things Posts: 435	Wheel Stud Problem mattfletcher @mattfletcher
	Jun 15, 2012 20:41:04 GMT Select Post Deselect Post Link to Post Back to Top
	probably find by putting the longer studs in you've narrowed the 'play' in the bolts holes- if you get what I mean


	Reply Quote