Here's a set of wheels that were recently loaned to be by the inimitable KFW. I've lost interest in them but am hoping that someone else would like to take them on. To use! not so sell or weigh!
They are in reasonable condition but very mucky and with plenty of surface oxidization. They do however start to clean up pretty well.
Specs are 5x13 Et24, 4x98 PCD CB58.1
I can see these working really well on something small - a 126 springs to mind but a little Yugo or maybe even a Panda could work too, obviously they will wobble onto 4x100 and the faily large centre bore will accomodate most other makes. But not Nissan's 59.1
I've popped a 145/60 onto the cleanest one this morning to hopefully inspire their use.
There ya go... there's five of 'em if you want 'em, but one of the rims has been clobbered.
Put the effort in and they could look like this.....
Did I mention that they were Free. Collect from Chichester PO19 or Horndean PO8, or maybe there's a way to get them on the pony express.
They are in reasonable condition but very mucky and with plenty of surface oxidization. They do however start to clean up pretty well.
Specs are 5x13 Et24, 4x98 PCD CB58.1
I can see these working really well on something small - a 126 springs to mind but a little Yugo or maybe even a Panda could work too, obviously they will wobble onto 4x100 and the faily large centre bore will accomodate most other makes. But not Nissan's 59.1
I've popped a 145/60 onto the cleanest one this morning to hopefully inspire their use.
There ya go... there's five of 'em if you want 'em, but one of the rims has been clobbered.
Put the effort in and they could look like this.....
Did I mention that they were Free. Collect from Chichester PO19 or Horndean PO8, or maybe there's a way to get them on the pony express.
