|
|
|
Apr 11, 2012 20:43:26 GMT
|
|
hi, ive got a 98 corolla1.6,and I'm going to have a crack at changing the clutch , has anybody got any tips or even a run down of what i have to do , thanks in advance
|
| |
|
|
|
|
|
Apr 11, 2012 21:10:03 GMT
|
|
buy a complete clutch kit, loosen gearbox onto a jack then you'll have access to the clutch make sure when put the new clutch on you use a clutch alignment tool you'll need it
|
| |
|
|
will930
Part of things
Decked K11 Micra - RetroRunner Mk2 Golf
Posts: 521
|
|
Apr 11, 2012 21:26:05 GMT
|
|
the gearboxes are very tight on these, best to remove the mount from the box/chassis for a little bit of extra room, and the rear engine mount is an ass to get to and don't forget to get it in otherwise the subframe needs to be dropped!
it is an ass
|
| |
|
|
|
|
|
Apr 11, 2012 21:41:46 GMT
|
|
Can be a big job. Usually people can cock up on the simplist things such as assessment of the situation. Don't rush, oh and use an alignment tool!
|
| |
|
|
will930
Part of things
Decked K11 Micra - RetroRunner Mk2 Golf
Posts: 521
|
|
Apr 11, 2012 21:49:12 GMT
|
|
done mine recently and it took a good 2 days but thats party due to it being -4 all day
|
| |
|
|
|
|
|
Apr 15, 2012 20:12:42 GMT
|
|
will930 do you mean remove the flattish bar thingy which runs between the front crossmember and the suspension crossmember ?also how do the driveshafts come out ? sorry to be a pain
|
| |
|
|
