JMY
Part of things
Posts: 308
|
|
|
Right! So I've decided to break the LS as I've bought another Capri. Car went from this: To this: So I've got most of this for sale! I'll be keeping the gearbox, diff, wheels, and maybe some other bits as spares. It's got a really lovely interior! every other interior I've seen the same as this has been really badly faded but the blue on this is still really bright! £200 for the seats including matching door cards and rear cards in perfect condition. The shell (apart from the damage) is actually in really really good condition, literally barely any rust at all. So loads of panels available! 1.6 Pinto engine, 65k miles, runs perfect, with all ancillaries £200 It's pretty much all available, if you want anything let me know, I may be up for swapping bits for tuning parts for a 2.0 Pinto, otherwise, cash is good! I'm in Epsom/Kingston, pop down and have a look if you want!
|
|
|
|
|
Pid363!
Posted a lot
Madness is all in the mind!
Posts: 1,039
|
|
|
pictutres wont load on my computer, how bad is the damage as i may be intrested in the shell when your done.
|
|
Stupid is as stupid does!
|
|
|
|
|
|
got the original LS steels by any chance?
|
|
|
|
dazcapri
North East
Enter your message here...
Posts: 1,056
|
|
|
pm sent
|
|
Mk3 Capri LS
|
|
trigga
Part of things
Posts: 211
|
|
|
are the front legs straight?
|
|
|
|
Scallywag
Part of things
Owner of Retro stance
Posts: 85
|
|
|
WHAT ARE THEM WHEELS THERE THE NUTS
|
|
RETRO STANCE
|
|
JMY
Part of things
Posts: 308
|
|
|
The car has been written off so the shell can't be used for a reshell, but you're more than welcome to cut parts out of the shell if you need specific bits, and all the panels apart from the passengers side wing, scuttle panel and bonnet are in magnificent shape, the doors are pretty much perfect!
|
|
|
|
Scallywag
Part of things
Owner of Retro stance
Posts: 85
|
|
|
any info on the wheels and would you swap for something like 15x8 jbw minilite wheels with yoko tyres for um...WHAT ARE THEY CALLED... i no there like bosozuko style but in a 108 fitment weird
|
|
RETRO STANCE
|
|
JMY
Part of things
Posts: 308
|
|
|
Sorry mate the wheels aren't for sale! in response to Slammage's message, I only have 1 (unused - spare) LS steel wheel, but I do have 4 GL steels, with very good tires, 1 fixable dent to one of the lips, and all the center caps and nut covers, however 1 of the steel trims is missing. I can take pictures tomorrow if anyones interested?
|
|
|
|
|
Pid363!
Posted a lot
Madness is all in the mind!
Posts: 1,039
|
|
|
Can see the pictures now would still be intrested in the shell and its only for motorsport so no worries about it being written off and can collect as only in Sutton.
|
|
Stupid is as stupid does!
|
|
|
|
Mar 10, 2012 11:30:59 GMT
|
where abouts are u as i may be interested in a few parts from the car
|
|
|
|
JMY
Part of things
Posts: 308
|
|
Mar 10, 2012 13:43:26 GMT
|
My insurance company said they want the shell when I'm done with it, so I'll have to give them a ring and ask if I can sell it for off road use. I am based in Epsom/Kingston (SW London/Surrey)
|
|
|
|
|
|
Mar 10, 2012 13:49:34 GMT
|
what sort of condition is the dashboard and parcel shelf and the rear bumper corners in and how much are u looking for?
|
|
|
|
|
|
Mar 10, 2012 14:42:35 GMT
|
how much for the front panel mate
|
|
"Understeer" is when you hit the fence with the front of the car.
"Oversteer" is when you hit the fence with the rear of the car.
"Horsepower" is how fast you hit the fence.
"Torque" is how far you take the fence with you
|
|
JMY
Part of things
Posts: 308
|
|
Mar 10, 2012 15:36:12 GMT
|
The dashboard was cracked badly in the crash, I'm keeping the parcel shelf and I've got some rear bumper corners from another Capri but they are a bit dented. Reggy, the front panel is in fantastic condition, but it's a little bit bent where the accident happened, I'll get some photos up this evening so you can see what its like, it's not major and definately repairable. You can have it for £20 but you'll have to cut it out yourself!
|
|
|
|
mikey5
Part of things
Posts: 124
|
|
Mar 10, 2012 18:29:30 GMT
|
Pm'd?
|
|
|
|
Pid363!
Posted a lot
Madness is all in the mind!
Posts: 1,039
|
|
|
Would be happy to give them back the shell when we done with it!
|
|
Stupid is as stupid does!
|
|
|
|
Mar 11, 2012 22:01:42 GMT
|
Is it the 2.0 how much for full wiring loom?
|
|
Maximum signature image height = 80 pixels.
|
|
JMY
Part of things
Posts: 308
|
|
Mar 12, 2012 18:36:14 GMT
|
Sorry wiring looms already been sold!
|
|
|
|
|