Right I have a cool set of rod/rat rod wheels here.
the fronts are a slightly mismatched pair, the actual rim width is about a 1/4" different but they are effectively both 6x15s Nice bright chrome. some minor surface rust on the rims. These are 5x 5.5" PCD so early Ford, pickups, Suzuki and the like. You could redrill or unilug them, plenty of metal. about a 3.75" BS on these.
the rears are 10x15s with 4" BS. these are unilug and my attempts to measure them suggest they run 4.75" to 5" and possibly out to 5.5"
These will fit a lot of hubs.
I can get the tyres removed if you want, they aren't much cop but would be fine for mocking up with or whatever. (they are 275s) Again these wheels have some patina and the centres are painted black.
They'll clean up with some effort, or powdercoat them.
I'm open to sensible offers. I'm in South Nottingham
Fronts:
Rears:
the fronts are a slightly mismatched pair, the actual rim width is about a 1/4" different but they are effectively both 6x15s Nice bright chrome. some minor surface rust on the rims. These are 5x 5.5" PCD so early Ford, pickups, Suzuki and the like. You could redrill or unilug them, plenty of metal. about a 3.75" BS on these.
the rears are 10x15s with 4" BS. these are unilug and my attempts to measure them suggest they run 4.75" to 5" and possibly out to 5.5"
These will fit a lot of hubs.
I can get the tyres removed if you want, they aren't much cop but would be fine for mocking up with or whatever. (they are 275s) Again these wheels have some patina and the centres are painted black.
They'll clean up with some effort, or powdercoat them.
I'm open to sensible offers. I'm in South Nottingham
Fronts:
Rears: