|
|
|
Jan 11, 2012 15:15:46 GMT
|
|
ok so my car is 12v, but i want to run hydraulics at 24v, so going to run 2 seperate batteries in series to power the hydraulics.
question is do i earth the 24v setup to the chassis? or just to the hydraulics? does it matter either way?
sounds silly but just checking. cheers
|
| |
|
|
sparkyt
Posted a lot
selling stuff
Posts: 1,767
|
|
Jan 11, 2012 15:51:13 GMT
|
|
Earth to the car mate that's fine ..( 20 year as an electrician not just guessing ) just keep the power + separate ..
|
| |
|
|
sparkyt
Posted a lot
selling stuff
Posts: 1,767
|
|
Jan 11, 2012 15:55:36 GMT
|
|
Are you going to pump the oil out of the rams or just use gravity to lower the car as you may want to reverse the power to the 24v pump . You may need to isolate the pump from the chassis .
|
| |
|
|
|
|
|
Jan 11, 2012 16:13:44 GMT
|
|
cheers for the reply mate, i thought that was the case just wanted to be 100%. just letting gravity do the work, not very fast but will do.and all the wiring and switch setup is for this.
cheers mate
|
| |
|
|
