|
|
|
Dec 10, 2011 20:15:26 GMT
|
|
Hi all, I'm sure this has been covered before but i cant find a thread on here. I have just bought some new alloys for a steal! The downside is they are 4x108 and my hubs are 4x114. Some people say they will work, others say there crud, People will allways have there opinions on them, so what i am asking is will they take up the play? (obviosly i won't be buying cheap ones )
Thanks guys!
|
| |
|
|
|
|
|
Dec 10, 2011 20:26:17 GMT
|
|
Too much of a difference. Wobble bolts are only any good for 2 maybe 3mm max.
|
| |
muttley racing ftmfwmf
|
|
|
|
|
Dec 10, 2011 20:30:29 GMT
|
|
Ahh bummer! just too much then? Has anyone tried the h&r adapters?
|
| |
|
|
v8will
Part of things
Posts: 20
|
|
Dec 10, 2011 23:17:06 GMT
|
|
H&R adaptors are only OK for certain fitments ie Porsche - VW etc. As usually the offset requirments of the car dictate what works. I don't think they do a 4x108 to 4x114.3 anyway.
Wobble bolts are 2mm max, ie 5x108 to 5x110
|
| |
|
|
damask
Part of things
Posts: 163
|
|
Dec 10, 2011 23:27:48 GMT
|
|
in the wiki (link at the top) there's a whole section on pcd's.... might be of some use?
|
| |
|
|
