niwid
Posted a lot
Posts: 1,743
|
|
|
|
Wondering if anyone could help. Just bought this lovely breadvan but i have no idea how much it has been lowered! Can anyone offer an educated guess?  |
| |
|
|
berendd
Europe
why do I need 3 keys for one car?
Posts: 1,449
|
|
|
|
|
40mm?
|
| |
|
|
|
|
|
|
|
|
|
|
That looks like a 80/60 have a look at the front drive shaft clearance to the inner wing its a lump lower than mine and mine is a 40/60
|
| |
|
|
RobinJI
Posted a lot
"Driven by the irony that only being shackled to the road could ever I be free"
Posts: 2,995
|
|
|
|
It looks like 50-60mm up front. I'm not sure out back though, probably a little lower. This is my old Coupe S on a 60/60 HnR cup kit, the wheel looks marginally higher in the front arch than yours:  |
| |
|
|
kerrly
Part of things
Posts: 266
|
|
|
|
60mm front 40mm rear is my bet. I tried 40mm and the front end still sat far too high so at least 1 and a half coils would come off to achieve a similar look to yours  |
| |
Last Edit: Dec 5, 2011 23:56:04 GMT by kerrly
|
|
niwid
Posted a lot
Posts: 1,743
|
|
|
|
|
thanks for your help guys!
from what can gather on the internet its probably 60/60 (or 60/40 with the rears set lower)
the fronts probably gonna come down about another 20/25mm and I'm whacking some 5.5j golf steels on with either 165 55 13 or 165 65 13 rubber
|
| |
|
|
