|
|
|
Nov 19, 2011 21:54:48 GMT
|
|
I need to clean the contacts of the plug that goes on the back of my head lights. But I can't work out how to get them out to clean them up. I am worried about breaking something, Ford MK3 escort.
|
| |
|
|
|
|
|
Nov 19, 2011 22:26:56 GMT
|
if they're like normal spade connectors that are in a housing, and are held in place by tags like these  you can remove them by getting a small flat blade screwdriver, and grinding it along its length so that its rectangular in section. you then need to push in in the little "notch" where the other terminal goes into the housing and push it so it flattens the tag. you should then be able to remove the terminal and clean the connector. you then need to bend the tag back befoere re-inserting the terminal. if they are H4 bulbs, you can get connectors cheaply on ebay. |
| |
|
|
