A few months ago I made a set of banded steel wheels for the Vitesse which is undergoing a little transformation.
However today these have come into my posession;
No, the tape measure isn't exagerating, they really are 11" wide as they stand now from sidewall to sidewall !
Now, to get them on a wheel and looking sensible (if that's possible) they need a rim AT LEAST 10" bead width.
Currently I have 7" and 8" fitted with 185/60 and 215/55 respectively.
These it would appear are F3 wets, marked 240/540 13 which is roughly 245/50R13.
Well, should I spark up the welder and make a pair of 10" rims to fit these on ??
What would you do ?
However today these have come into my posession;
No, the tape measure isn't exagerating, they really are 11" wide as they stand now from sidewall to sidewall !
Now, to get them on a wheel and looking sensible (if that's possible) they need a rim AT LEAST 10" bead width.
Currently I have 7" and 8" fitted with 185/60 and 215/55 respectively.
These it would appear are F3 wets, marked 240/540 13 which is roughly 245/50R13.
Well, should I spark up the welder and make a pair of 10" rims to fit these on ??
What would you do ?
rip to shiz in the dry though.
