|
|
Sept 25, 2017 22:16:41 GMT
|
I bought these last year for my Foz and had them blasted and professionally sprayed satin black. They have never had tyres or valves fitted since painting. They are perfect except for one wheel has been scratched on the inner rim. They are 7x17" et 55 pcd is 5x100 so will fit Forester, Legacy, Impreza etc. Please check before buying! £450 delivered UK mainland. Or £400 collected from Cheshunt, Herts EN7
|
|
Sittin' here in a hired tuxedo. Wanna see my bacon torpedo?
|
|
|
|
|
Sept 25, 2017 21:41:55 GMT
|
Pair of bare std bearing / std stud hubs. No caps, studs or bearings.
Slight storage marks. Never seen bearings!
£95 posted.
|
|
Sittin' here in a hired tuxedo. Wanna see my bacon torpedo?
|
|
|
|
Sept 25, 2017 21:26:03 GMT
|
Continuing my slow garage clearance I have a standard type 9 gearbox for sale. Comes with original Ford (probably Sierra) bellhousing. Downside is that it has been kept outside and at some point it has got water inside it. This has left the gears locked up with corrosion. Selling for parts or rebuild only. £100 cash on collection only from Cheshunt, Herts EN7. About 5 mins from junction 25 of the M25.
|
|
Sittin' here in a hired tuxedo. Wanna see my bacon torpedo?
|
|
|
|
Sept 21, 2017 6:53:05 GMT
|
Trust me - time doesn't get any easier to hang onto the older they get!
My mojo is on its way back, partly inspired your build.
I am still surprised / annoyed about the amount of junk I have stored thinking I would need it "one day". Its quite therapeutic to throw it all away.
I'm in Cheshunt, so in the area.😉
Keep up the good work.👍
|
|
Sittin' here in a hired tuxedo. Wanna see my bacon torpedo?
|
|
|
|
Sept 17, 2017 20:37:37 GMT
|
As you can see I don't have any access issues apart from the slope from road to gate, and a gentle one up to garage doors. I've got a hatch with a hefty rollcage and a lot of rubbish welding by previous owner. Had it 3 years so far and its only ever seen a mock up engine! Best start my own thread before I waffle too much more!
|
|
Sittin' here in a hired tuxedo. Wanna see my bacon torpedo?
|
|
|
|
Sept 9, 2017 19:31:15 GMT
|
Sold :-)
|
|
Sittin' here in a hired tuxedo. Wanna see my bacon torpedo?
|
|
|
|
Sept 8, 2017 10:39:23 GMT
|
Any offers?
|
|
Sittin' here in a hired tuxedo. Wanna see my bacon torpedo?
|
|
|
|
Sept 7, 2017 19:32:54 GMT
|
Thanks very much for that. I knew I would need some way of tying into the existing slab, but the way you have done it makes a lot of sense. Did you also use a damp proof layer before the concrete?
I bought a complete garage - big thanks to some friends on a very wet and cold February day! I got some plain box profile roof sheets, but was hoping to do the job once with the insulated ones.
I also have a Chevette, but mine has turned into a long term project due to lack of spare time. I'm definitely not brave enough to start a garage extension at this time of year.
Chris
|
|
Sittin' here in a hired tuxedo. Wanna see my bacon torpedo?
|
|
|
|
Sept 5, 2017 21:10:06 GMT
|
Hi, your garage build looks great. Good luck with getting it done before the weather gets worse.
I am doing the same thing- extending an existing base on three sides and using prefab panels on top of blocks for extra heighth.
Can I ask a couple of questions about your base?
When you put the rebar in, how many did you use and at what spacing and height? Same thing with the mesh - how close to the outside edges did you have it and was it supported on "chairs" to keep it about 2" below the surface.
Just seen the posts about the insulation panels. Have you seen the insulated box profile roof panels?
|
|
Sittin' here in a hired tuxedo. Wanna see my bacon torpedo?
|
|
|
|
Sept 3, 2017 21:55:49 GMT
|
|
|
Sittin' here in a hired tuxedo. Wanna see my bacon torpedo?
|
|
|
|
Sept 3, 2017 15:22:44 GMT
|
Any offers before it goes in the bin? [/img] [/img]
|
|
Sittin' here in a hired tuxedo. Wanna see my bacon torpedo?
|
|
|
|
Mar 15, 2017 14:45:12 GMT
|
Provisionally sold
|
|
Sittin' here in a hired tuxedo. Wanna see my bacon torpedo?
|
|
|
|
Mar 13, 2017 23:33:06 GMT
|
Bump for lower price
£40 posted or collected for £35.
|
|
Sittin' here in a hired tuxedo. Wanna see my bacon torpedo?
|
|
|
|
Mar 13, 2017 23:28:48 GMT
|
Gone to a new home 👍👍👍
|
|
Sittin' here in a hired tuxedo. Wanna see my bacon torpedo?
|
|
|
|
Mar 10, 2017 14:00:50 GMT
|
For sale is a complete front end from a Chevette. As you can see it was cut from the car directly across the inner wings from one side to the other. The front panel between the headlights itself is in excellent condition while the right hand side will need some attention to the wing mounting flange. There is also a small hole in the front just on the leading edge above the right indicator and the lower edge has a small crease (towing injury!). Collection only due to size and weight from Cheshunt, Herts EN7. Available most evenings and weekend. Price £200
|
|
Sittin' here in a hired tuxedo. Wanna see my bacon torpedo?
|
|
|
|
|
My two-penneth. .
One option is to make an extension to the input shaft. Think of a short 3/8" ratchet extension to give you the idea.
The more popular option for the RX8 converters (including me) is to have the appropriate amount machined off the bell housing.
Have you seen the threads on the turbosport forum? They have covered most of the different fitment methods. There is plenty of material on the BH just be careful of the counter sunk bolts!
Good luck 😉
|
|
Sittin' here in a hired tuxedo. Wanna see my bacon torpedo?
|
|
|
|
|
Just seen this thread.
Loving the stance, the wheels and the grille 👍👍
Pm'ed you about the cage
|
|
Sittin' here in a hired tuxedo. Wanna see my bacon torpedo?
|
|
|
|
|
Provisionally sold 👍
|
|
Sittin' here in a hired tuxedo. Wanna see my bacon torpedo?
|
|
|
|
|
The winches were fitted into VW Crafters that are fitted with ramps for moving small cars (sub 1000kg) around the country. They are 12v, rated at 3700lbs (1678kg) so with appropriate fixings and power supply should have no trouble doing that.
Sorry but I don't know what parts are missing, they were removed before I started there.
Had some interest on pm, so will let you know if that falls through.
|
|
Sittin' here in a hired tuxedo. Wanna see my bacon torpedo?
|
|
|
|
|
SOLD 👍👍👍
|
|
Sittin' here in a hired tuxedo. Wanna see my bacon torpedo?
|
|