mig
Part of things
Posts: 146
|
|
Sept 25, 2016 17:02:38 GMT
|
Neil,
Parents live in Chorley so I can get some up to them in couple weeks.( I am happy to deliver to a location just off the motorway anywhere along the M40/M6 route as well)
I have plenty,let me know how many you would like.
Cheers
|
|
|
|
|
mig
Part of things
Posts: 146
|
|
Sept 25, 2016 11:25:08 GMT
|
No problem,I have pm'ed you.
There are several sets of no. 3 if anybody else needs a set in their life (everybody needs at least one set of shiny drawers)
|
|
|
|
mig
Part of things
Posts: 146
|
|
Sept 24, 2016 20:58:40 GMT
|
Suede steel toecap + steel insole safety boots. These are water and oil resistant, and are in really excellent condition. They have been worn a couple of times briefly but I need a size smaller. £20 or will swap for UK size 6 in similar condition. Surprisingly useful holder for disposable gloves. This screws to the wall, keeps them to hand and away from your work area. Complete with 2 unopened boxes of gloves in size of your choice. £10 Will post, though the cost will depend on weight (probably around £5.00). Or, I am willing to meet anywhere near an M1 junction between London and Barnsley next weekend to drop off.
|
|
|
|
mig
Part of things
Posts: 146
|
|
Sept 24, 2016 20:45:39 GMT
|
Here we have a set of metal drawers ideal for organising tools etc. These are lockable and come with the correct key. Size is 27" tall x 11" wide x 16"deep. There are six equally sized drawers, as shown in the picture. £15.00. Next, a set of sturdy plastic drawers with a metal frame. These measure 17" tall x 14"wide x 9"deep. There are 8 equally sized drawers. £10.00 Finally, here is a set of stainless steel drawers which are really useful for sorting all sorts of things such as screws, bolts etc. These are 9" tall and 6" wide and 23" deep. £5.00 I also have some aluminium drawers which are very similar to the stainless steel ones, but lighter and not quite as sturdy. Sorry, no picture. £5.00 All of these can be posted although they are quite heavy. Also, I will be travelling up the M1 from London to Barnsley next weekend and am happy to deliver to a location just off the motorway anywhere along the route.
|
|
|
|
mig
Part of things
Posts: 146
|
|
Jun 18, 2016 11:05:36 GMT
|
FOR SALE 4X BORBET A 5X112 ET21 16"X7.5 ALLOYS FOR SALE WILL BE SOLD WITHOUT TYRES. PIC IS A LITTLE FLATTERING, THEY IDEALLY NEED A REFURB. NEXT PIC SHOWS A CLOSE UP OF THE WORST PART OF THE WORST WHEEL. LOOKS UNSIGHTLY BUT IS COSMETIC ONLY. WHEELS ARE STRAIGHT WITH NO RIM DAMAGE £290 ONO COLLECT NEAR THE ACE CAFE IN LONDON OR WILL POST FOR £40 OR WRAP FOR YOUR OWN COURIER. TRAVEL ALONG THE M1 AS FAR AS SHEFFIELD OR M6 AS FAR AS MANCHESTER SO MAY BE ABLE TO DELIVER MEET UP CLOSE TO THE MOTORWAY.
|
|
|
|
mig
Part of things
Posts: 146
|
|
May 25, 2016 21:36:00 GMT
|
Sounds good,I won't be any earlier than lunchtime though. If you Pm me a tel. no we can sort out a time on Sat. I can PM my no. if you prefer.
|
|
|
|
mig
Part of things
Posts: 146
|
|
May 25, 2016 21:04:59 GMT
|
It take set 2! Also any idea of weight capacity on the lifting tackle? I can probably get another set,where are you based? According to pic. no 2 500cwt or as Nigel Farage would say 250 kg
|
|
|
|
mig
Part of things
Posts: 146
|
|
May 25, 2016 21:00:07 GMT
|
When you next in Sheffield? I'll take both regulators and the drawers if for some reason guz dosent have them, where in Sheffield do you travel to? I'm Sheffield south In Barnsley this weekend so could meet up then? have two sets of drawers so I can put your name on the second set if you like? PM me a tel. no if you want to arrange collection. Cheers
|
|
|
|
mig
Part of things
Posts: 146
|
|
May 25, 2016 20:36:45 GMT
|
As it happens I will be going past this Sat. lunchtime if that works for you? No need to send any money,but you if you PM your tel. no. we can tie up delivery
Actually have two sets of these so if anyone else wants a set let me know.
|
|
|
|
mig
Part of things
Posts: 146
|
|
May 25, 2016 19:38:32 GMT
|
Clearing out the garage First up a really quite old but still in amazing condition Block and Tackle. Tempted to keep it but I no longer have a garage with a lifting beam and have an engine crane Since I am happy to hang on to it £25 Really useful metal drawers,my spanners have never been so well organised 11 inches wide 16 deep and 34 tall. 15 drawers £15 I think they are both under 15kg so post is possible at £12 with Hermes but I will need to check the weights first CO2 regulators both lightly used £3.95 to post two stage £12 single stage £5 All O.N.O and can be collected Wembly not far from the Ace Cafe, Travel up the M1 to sheffield regularly so may be able to drop off meet up VERY near the motorway
|
|
|
|
mig
Part of things
Posts: 146
|
|
|
Haynes Electrical & Electronic Systems Manual and the tuning a series please
|
|
|
|
mig
Part of things
Posts: 146
|
|
May 31, 2015 20:42:12 GMT
|
|
|
|
|
mig
Part of things
Posts: 146
|
|
May 23, 2015 20:13:57 GMT
|
Hi, I have a set of Turbovanes(?) 14x6 5x112 70mm center bore not sure of offset but they looked a good fit on the van Stamped on the back is 121 B 79 47.If you are interested I'll measure the ET. Really need a re-paint but wheels themselves are in good condition Based in Wembly but can get them to Manchester Sheffield or Nottingham fairly easily. I also have a set of slotmags 14x7 5x112 70mm center bore ET 31 but they are difficult for me to retrieve at the moment. one is proving difficult to seal(I am fairly sure it isn't porous as it is leaking at the rim seal.Really good load rated tyres new center caps. I don't really want to sell so I would need a really good offer to part with them.
|
|
Last Edit: May 23, 2015 20:15:39 GMT by mig
|
|
mig
Part of things
Posts: 146
|
|
Apr 11, 2015 18:54:00 GMT
|
PM'ed re engine,Cheers
|
|
|
|
mig
Part of things
Posts: 146
|
|
|
|
|
|
|
mig
Part of things
Posts: 146
|
|
May 20, 2014 20:51:37 GMT
|
Hi, I have a pair of these,(not a full set unfortunately) nmoc.forumotion.com/t1994-10-alloy-wheelsI would swap for a pair of 145/10 tyres for a trailer project,so good side walls and just legal tread is fine.
|
|
Last Edit: May 20, 2014 20:52:03 GMT by mig
|
|
mig
Part of things
Posts: 146
|
|
May 20, 2014 12:46:36 GMT
|
I am after a pair of 14" slotmags 6" (or narrower)5x112. I have a pair of 7" to swap if wanted (no power steering so trying to fit narrow tyres on the front) Happy to buy 2 or 4 though if needed. Thanks
|
|
|
|
mig
Part of things
Posts: 146
|
|
May 20, 2014 12:41:10 GMT
|
Any one have any Borbet A wheels for sale? 5x112 Merc Fitting Pretty plaese
|
|
|
|
mig
Part of things
Posts: 146
|
|
Mar 13, 2014 22:34:36 GMT
|
|
|
|
|
mig
Part of things
Posts: 146
|
|
Mar 19, 2013 10:45:03 GMT
|
|
|
|
|