|
|
|
Oct 30, 2010 18:29:12 GMT
|
|
the PCD (4x108)is the same.. but is the center bore?and what sort of offset thay got?
do thay fit on a FWD ford??
seen a cheap set and think thay would look good on my next project ;D
|
| |
|
|
|
|
RobinJI
Posted a lot
"Driven by the irony that only being shackled to the road could ever I be free"
Posts: 2,995
|
|
Oct 30, 2010 19:22:01 GMT
|
According to This site, the saab wheels have around a 5mm lower offset, and a 1.9mm larger centre bore, so they should be a pretty good fit, although spigot rings could be a pain with a centre bore difference that small. |
| |
|
|
kee
Posted a lot
Posts: 4,989
|
|
Oct 30, 2010 19:29:00 GMT
|
|
robin had some saab wheels on his sierra and it looked fantastic
|
| |
|
|
|
|
|
Oct 30, 2010 20:03:04 GMT
|
|
|
| |
|
|
|
|
|
Oct 30, 2010 20:06:45 GMT
|
|
If you go onto uksaabs,you find 15" cross spokes easy to obtain,but 16" like poor quality wobbly children's play pony droppings.
|
| |
|
|
|
|
saab wheels on a ford..??Robinxr4i
@robinxr4i
Club Retro Rides Member 143
|
Oct 30, 2010 21:44:00 GMT
|
robin had some saab wheels on his sierra and it looked fantastic Yes I did........  I used normal 60 degree tapper bolts and didn't use spigot rings. I had no problems! As for the offset the Saab wheels are a little lower than your average FWD Ford wheel, but not by loads, you shouldn't have any problems with clearance. |
| |
Sierra - here we go again! He has an illness, it's not his fault.
|
|
|
|
|
|
|
|
You're basically looking at saab 900/9000 wheels made 88-97. The correct ones have an extra 'locating' lug, it can be confusing as they did similar wheel styles using the earlier triumph PCD. Oh and modern stuff is 5-stud vauxhall...
|
| |
'98 e36 316i lux
'97 mx5 harvard
'87 Saab 900 T16s
|
|
|
|
|
|
|
I have a set of those fitted to my Audi 80, they too have a pcd of 4 x 108 but have a much smaller centre bore, so I will be fitting spigot rings. They also stick out further but not by much.  |
| |
|
|
|
|
|
|
|
So do saab wheels fit a peugeot, with ford and pug having the same fitment?  |
| |
|
|
conrad
Posted a lot
Here to fix your cabin.......
Posts: 1,678
|
|
|
|
|
if it's a peugeot with 4x108 pcd and not the 5 stud or 3 stud ones then it should yes. Seeing as you can put peugeot wheels on a sierra, and saab wheels, should work the other way around
edit, i must add not all saab wheels are 4 stud though
|
| |
Last Edit: Nov 5, 2010 13:10:18 GMT by conrad
|
|
Earth Rocker
Part of things
Among the living.....Just!!!
Posts: 215
|
|
|
|
|
Keep an eye out as well for pre 87 Saab alloys, because the handbrake is on the front and will not fit.
|
| |
|
|
|
|
|
|
|
|
Yeah I didnt really elaborate the question, peugeot is 4x108 thanks for the reply.
|
| |
|
|
