right guys
chevy v8 facory bellhousing, cast aluminium, fits saginaw 3 and 4 speeds, muncie's, and I think b/w super T10's (no cracks or splits)
- fits chevy v8's, and also the late chevy straight sixes
I know for a fact that an old boy stock car racing mate has used this type of bellhousing to fit an early transit gearbox to a chevy v8, so in theory you could use it to fit a chevy v8 onto a scimitar 4 speed overdrive box - we were contemplating doing this, needs a few holes drilling, and a spacer making up ;D
50 of your finest english pounds, may also have a 168 tooth chevy manual flywheel to go with this, but that would be extra $$$
free delivery to area 52, southern swapmeet (essex), any of the big-ish shows throughout the year - or can courrier / post at cost - bellhousing is light, cast iron flywheel is, er, not
- or collect from abergele, north wales
payment wise, would prefer a cheque in advance (skint!) - but COD is ok too
cheers -kev
EDIT - NOW SOLD - TWICE!
chevy v8 facory bellhousing, cast aluminium, fits saginaw 3 and 4 speeds, muncie's, and I think b/w super T10's (no cracks or splits)
- fits chevy v8's, and also the late chevy straight sixes
I know for a fact that an old boy stock car racing mate has used this type of bellhousing to fit an early transit gearbox to a chevy v8, so in theory you could use it to fit a chevy v8 onto a scimitar 4 speed overdrive box - we were contemplating doing this, needs a few holes drilling, and a spacer making up ;D
50 of your finest english pounds, may also have a 168 tooth chevy manual flywheel to go with this, but that would be extra $$$
free delivery to area 52, southern swapmeet (essex), any of the big-ish shows throughout the year - or can courrier / post at cost - bellhousing is light, cast iron flywheel is, er, not
- or collect from abergele, north wales
payment wise, would prefer a cheque in advance (skint!) - but COD is ok too
cheers -kev
EDIT - NOW SOLD - TWICE!
