NOW SOLD: a set of four Mitsubishi multispoke alloys
£90.00
These are 4x114.3 so a popular fitment on most Japanese 4 stud vehicles (Or will fit Bedford Rascals ;D)
7"x14" - with quite a wide offset I don't know the offset but can find out next time I'm down at Area52 where they are stored. They do stick out quite a way! EDIT: Offset is 6mm
They come come as a set of four with nothing else - no centre caps, no wheel nuts etc....
They are in very good condition overall with just some slight kerb rash to the edges of a few of the wheels. Not buckled, perfectly round, no nasty chunks out of them. I was going to sand blast them, paint them bright silver again and fit them to my Rascal, but some Turbovecs have taken their place, so I no longer have a need for them.
They only need a repaint if you really want to remove the slight kerb rash on a few of the wheels. An afternoon with some wet&dry to get the rim perfectly smooth is all you need to make these mint and you'll have a perfect base for a set of stunning wheels. Other than the kerb rash (as can be seen in the pics) the paint is in excellent condition and you could easily fit these and roll as they are if you weren't as fussy as me
I can get them couriered for £20.00 or you can collect from Bristol or arrange for a RR courier service?
You're welcome to come & view them. Those 'in the know' will know that this is a good price for a solid set of these unusual wheels.
On with the pics of each individual wheel:
£90.00
These are 4x114.3 so a popular fitment on most Japanese 4 stud vehicles (Or will fit Bedford Rascals ;D)
7"x14" - with quite a wide offset I don't know the offset but can find out next time I'm down at Area52 where they are stored. They do stick out quite a way! EDIT: Offset is 6mm
They come come as a set of four with nothing else - no centre caps, no wheel nuts etc....
They are in very good condition overall with just some slight kerb rash to the edges of a few of the wheels. Not buckled, perfectly round, no nasty chunks out of them. I was going to sand blast them, paint them bright silver again and fit them to my Rascal, but some Turbovecs have taken their place, so I no longer have a need for them.
They only need a repaint if you really want to remove the slight kerb rash on a few of the wheels. An afternoon with some wet&dry to get the rim perfectly smooth is all you need to make these mint and you'll have a perfect base for a set of stunning wheels. Other than the kerb rash (as can be seen in the pics) the paint is in excellent condition and you could easily fit these and roll as they are if you weren't as fussy as me
I can get them couriered for £20.00 or you can collect from Bristol or arrange for a RR courier service?
You're welcome to come & view them. Those 'in the know' will know that this is a good price for a solid set of these unusual wheels.
On with the pics of each individual wheel: