Rich G
Posted a lot
Keyboard Worrier
Posts: 1,059
|
|
Sept 17, 2009 19:30:21 GMT
|
|
The chrome "over-riders" on the front of 12/50s (and 13/60s for that matter) - are they handed side to side or are both just the same?
|
| |
|
|
|
|
|
Sept 17, 2009 19:43:00 GMT
|
 I'd hazard a guess at being identical due to the flat positioning of them. But mine is a few miles away hiding in my garage at the moment. I'll go and look in the Rimmer Bros catalogue and be back in a minute.. |
| |
...proper medallion man chest wig motoring. |
|
|
|
|
Sept 17, 2009 19:46:33 GMT
|
|
13/60s are different left and right. 12/50s are only sold in pairs so I can't tell...
|
| |
Last Edit: Sept 17, 2009 19:48:35 GMT by ben711200
...proper medallion man chest wig motoring. |
|
Seth
South East
MorrisOxford TriumphMirald HillmanMinx BorgwardIsabellaCombi
Posts: 15,515
Member is Online
|
|
Sept 17, 2009 19:52:38 GMT
|
The bigger ones fitted to the earlier shape ones (948s, 1200s, 12/50s) are not handed. Don't know about the smaller 13/60 ones. Rear overriders are handed  |
| |
Last Edit: Sept 17, 2009 19:55:06 GMT by Seth
Follow your dreams or you might as well be a vegetable. |
|
Rich G
Posted a lot
Keyboard Worrier
Posts: 1,059
|
|
Sept 17, 2009 20:05:11 GMT
|
Thanks for the replies guys. Looking at those photos now I'm not sure whether the ones I have are 12/50 or 13/60 ones - anyone got any measurements for them?  I bought them ages ago (have 4 in total) to make a custom toothed grille - they have three mounting points on the back if that helps to identify them. |
| |
|
|
Seth
South East
MorrisOxford TriumphMirald HillmanMinx BorgwardIsabellaCombi
Posts: 15,515
Member is Online
|
|
Sept 17, 2009 20:10:42 GMT
|
the bigger ones are much bigger  Just been out to measure and they're about 12 1/2" tall. |
| |
Follow your dreams or you might as well be a vegetable.
|
|
Rich G
Posted a lot
Keyboard Worrier
Posts: 1,059
|
|
Sept 17, 2009 20:49:07 GMT
|
|
Thanks Seth! Just been out to the shed of dread and measured the ones I have - just under 12.5 inches so they must be 12/50 ones. All 4 look the same so either they're not handed or I've got 4 the same side.. ;D
|
| |
|
|
