Hey Everyone
I bought this a few months ago with the intention of making it look pretty, however work has suddenly gotten very very quiet and I am getting rather short of money so I cant have any projects lying around. So it has to go.
This is a project, but it only needs prep and paint. It has had all '67' US spec bits fitted as this was the look I was going for.
As I have said, I bought this a few months ago after the previous owner spent £800 on welding, and the owner before him had spent £1800 on more welding!!! Thats the main reason I bought the car as it now requires no welding at all!! It has had new heater channels, pan halfs,lower bulkhead and rear cross members,a posts, rear body mounts and all lower 1/4 panels. Its had a whole new front clip fitted!! Whole new rear end (bumper mounts, engine bay side trays (all hookeys panels),new rear valence, with catch for smooth decklid). Top of the bulkhead replaced, a posts redone with hookeys thick gauge ones, dash welded smooth (but kept the glovebox lid) as it has been butchered too much to repair to original. All trim holes have been welded up, but can easily be re drilled if you prefer. The fuel filler flap was welded up to continue with the '67' look, theres probably more i've forgotten about too. The inner arches have also been cleaned and stonechipped.
The car comes with loads of new parts, nos front wings, new rear wings with frenched rear lights, 2 doors(may need small repairs to bottoms), smoothed 67 decklid, bonnet, new cal look window rubbers, new one piece window kit, steel wheels, plus everything else, lights, glass, interior (recaro front seats)plus loads more. It has EVERYTHING, and most of it is new. The only thing it doesnt come with is an engine but I may be able to aquire a 1200 engine for another £100 or so if someone wants it.
Here are 2 links when the other welding work was done, and as the last owner bought the car. All the car needs is to be prepped and painted, and put back together. A nice easy project for someone!
volkszone.com/VZi/showthread.php?t=418045
volkszone.com/VZi/showthread.php?t=514417
Here are some pics of the car after I picked it up. All the parts are inside and ready to be bolted on.
I am based in Epsom in Surrey however the car is at my friends near Gatwick Airport. I can deliver the car anywhere up to the Midlands at an additional cost to the buyer.
I am asking the bargainous price of £900 for a car that does not require a single piece of welding!!!
Any questions just message me.
Cheers
Sammo
I bought this a few months ago with the intention of making it look pretty, however work has suddenly gotten very very quiet and I am getting rather short of money so I cant have any projects lying around. So it has to go.
This is a project, but it only needs prep and paint. It has had all '67' US spec bits fitted as this was the look I was going for.
As I have said, I bought this a few months ago after the previous owner spent £800 on welding, and the owner before him had spent £1800 on more welding!!! Thats the main reason I bought the car as it now requires no welding at all!! It has had new heater channels, pan halfs,lower bulkhead and rear cross members,a posts, rear body mounts and all lower 1/4 panels. Its had a whole new front clip fitted!! Whole new rear end (bumper mounts, engine bay side trays (all hookeys panels),new rear valence, with catch for smooth decklid). Top of the bulkhead replaced, a posts redone with hookeys thick gauge ones, dash welded smooth (but kept the glovebox lid) as it has been butchered too much to repair to original. All trim holes have been welded up, but can easily be re drilled if you prefer. The fuel filler flap was welded up to continue with the '67' look, theres probably more i've forgotten about too. The inner arches have also been cleaned and stonechipped.
The car comes with loads of new parts, nos front wings, new rear wings with frenched rear lights, 2 doors(may need small repairs to bottoms), smoothed 67 decklid, bonnet, new cal look window rubbers, new one piece window kit, steel wheels, plus everything else, lights, glass, interior (recaro front seats)plus loads more. It has EVERYTHING, and most of it is new. The only thing it doesnt come with is an engine but I may be able to aquire a 1200 engine for another £100 or so if someone wants it.
Here are 2 links when the other welding work was done, and as the last owner bought the car. All the car needs is to be prepped and painted, and put back together. A nice easy project for someone!
volkszone.com/VZi/showthread.php?t=418045
volkszone.com/VZi/showthread.php?t=514417
Here are some pics of the car after I picked it up. All the parts are inside and ready to be bolted on.
I am based in Epsom in Surrey however the car is at my friends near Gatwick Airport. I can deliver the car anywhere up to the Midlands at an additional cost to the buyer.
I am asking the bargainous price of £900 for a car that does not require a single piece of welding!!!
Any questions just message me.
Cheers
Sammo