Moving house in a coupe of weeks so got to have a clear out (and need the cash), can arrange postage on
smaller bits (ask for cost) but larger bits will be collection from wellingborough(northamptonshire).
let me know if any of the prices are well off, i'm open to offers on everything:
Rover K series PTP inlet manifold (VVC with lettering removed) with map blanking plate for
non-vvc enginines, no injectors £50:
56mm Thottle body converted for k series with correct tps and cable bit, throttle stop
added and polished up all shiney! £25:
Rover K series Piper/PTP sportscams (pair), in vgc, will run fine on mems suitable
for 1.4, 1.6 & 1.8 16v enignes (not vvc) £250:
Rover VVC exhaust cam (single), in vgc, upgrade for 16v engines £40:
Rover PG1 (k series) gearbox completely rebuilt with diesel gearset for taller 4th & 5th
(better cruising) all new bearings, selectors etc, ran for approx 1500 miles in my k series mini £250:
can supply with pg1 flywheel for free if needed
Adjustable fuel pressure regulator, universal type - don't know much about it £10?:
rover metro gti clocks (150mph whoohoo!), good condition showing 79k £20:
Rover 100/MGF/MPI Mini universal steering wheel boss, nice quality aluminium £15:
MGF steering wheel with airbag, good condition (fits rover 100) £40
Mountney Steering wheel with mini (pre 1997) boss £10
Stainless overbraid for hoses etc never been opened £20:
Aston style filler cap will fit mini maybe others (up to 56mm neck)? good condition £10
Stainless exhaust boxes, bought new for a triumph bike and used very briefly, vgc, very good quality,
1.5" bore. Custom exhaust anyone? £130
2" bore backbox for mini etc, good condition £20:
Remote servo, 2:1 ratio was bought new but too powerful for my set-up, been sat in dry storage
a while but looks fine £40
Remote servo 1.5:1 again bought new but removed due to different brake set-up in good
condition but with one mounting stud cut off (doesn't effect enything) £50
Speedwell gearknob, mini fitting, vgc £10:
Cheers!
smaller bits (ask for cost) but larger bits will be collection from wellingborough(northamptonshire).
let me know if any of the prices are well off, i'm open to offers on everything:
Rover K series PTP inlet manifold (VVC with lettering removed) with map blanking plate for
non-vvc enginines, no injectors £50:
56mm Thottle body converted for k series with correct tps and cable bit, throttle stop
added and polished up all shiney! £25:
Rover K series Piper/PTP sportscams (pair), in vgc, will run fine on mems suitable
for 1.4, 1.6 & 1.8 16v enignes (not vvc) £250:
Rover VVC exhaust cam (single), in vgc, upgrade for 16v engines £40:
Rover PG1 (k series) gearbox completely rebuilt with diesel gearset for taller 4th & 5th
(better cruising) all new bearings, selectors etc, ran for approx 1500 miles in my k series mini £250:
can supply with pg1 flywheel for free if needed
Adjustable fuel pressure regulator, universal type - don't know much about it £10?:
rover metro gti clocks (150mph whoohoo!), good condition showing 79k £20:
Rover 100/MGF/MPI Mini universal steering wheel boss, nice quality aluminium £15:
MGF steering wheel with airbag, good condition (fits rover 100) £40
Mountney Steering wheel with mini (pre 1997) boss £10
Stainless overbraid for hoses etc never been opened £20:
Aston style filler cap will fit mini maybe others (up to 56mm neck)? good condition £10
Stainless exhaust boxes, bought new for a triumph bike and used very briefly, vgc, very good quality,
1.5" bore. Custom exhaust anyone? £130
2" bore backbox for mini etc, good condition £20:
Remote servo, 2:1 ratio was bought new but too powerful for my set-up, been sat in dry storage
a while but looks fine £40
Remote servo 1.5:1 again bought new but removed due to different brake set-up in good
condition but with one mounting stud cut off (doesn't effect enything) £50
Speedwell gearknob, mini fitting, vgc £10:
Cheers!
