Found some more grot, So yanked up the rest of the carpet, found lots more grot
So I'm after anyone who can weld. With all the tools and gear needed. I aint after a cheap "mates rates" job I'm willing to pay good for a good job! Quick rundown of work needed atm.
Mostly passenger side
Outer rear seatmountin in floor cutting out and replacing
2 x heavy rust patches in passenger side footwell, Might well become holes once u hit them with a grinder. Would need cutting out to fresh metal and plating
Rear section where the floor joins to the inner sill cutting back to bare metal and plating. Possibly the front too on this side as there is a bubble that will just get worse might as well do it when carpet is up.
Drivers side
Not so bad, Front section where floor joins innersill. again cutting back to bare metal and plating
It's usual Sierra Stuff it seems.
Basicly i don't want just quick plate over the rust style jobbies. I want cut back to bare and fix kinda thing.
I don't mind helping remove/refit interior. Or i can leave car with ya and come back when it's done etc etc.
I'd like west midlands area, don't mind within 50 miles of WS99NY would even consider 75 miles. I just want a proper job doing, I don't ever want to have the carpet up again
so i can then get on with the rest of the car.Hope someone can help
Chears
