stealthstylz
Club Retro Rides Member
Posts: 14,855
Club RR Member Number: 174
|
|
Dec 30, 2007 21:21:07 GMT
|
|
How do I tell if the compomotives i've got on ebay are group 4 fitment? They have steel inserts in the hubs to take a standard looking wheelnut (not a sleeve nut) if that makes any difference.
Matt
|
| |
|
|
markbognor
South East
 
Posts: 9,970
Club RR Member Number: 56
|
|
Dec 30, 2007 22:27:49 GMT
|
All I can find in FIA group 4 regs applies to diameter, it must be the same front to rear. Page 4FIA Regs |
| |
Last Edit: Dec 30, 2007 22:29:24 GMT by markbognor
|
|
haggis
Part of things
Posts: 459
|
|
Dec 30, 2007 23:55:50 GMT
|
|
you can get group 4 nuts easily enough. i bought a set for 50 quid brand new off scumbay
|
| |
|
|
Anglia68
Posted a lot
Powered By Boredom.
Posts: 2,049
|
|
|
|
|
All I know is that Gp4 wheels have steel inserts.
Wether the Gp4 nuts and studs are a different diameter from standard nuts and studs I don't know but suspect they may be.
|
| |
|
|
gearoil
Part of things
Projectless...
Posts: 918
|
|
|
|
|
Studs a bit longer...?
|
| |
|
|
stealthstylz
Club Retro Rides Member
Posts: 14,855
Club RR Member Number: 174
|
|
Dec 31, 2007 10:35:32 GMT
|
These are the wheel inserts  Matt |
| |
|
|
|
|
|
Dec 31, 2007 10:47:18 GMT
|
|
It is the size of the inserts in the wheel, i think its capri laser wheels are the only standard one you can swap the inserts to make them grp 4, so, i would imagine if these wheels have the big inserts, you could swap them to small ones. but I'm not 100% sure.....
|
| |
|
|
