Hi guys,
Let's talk about grease! I sometimes get confused on what is what when it comes to choosing a suitable grease.
I've been chasing a driveline vibration and removed the propshaft for a proper inspection, found the Hardy Spicer is worn (notchy) and the Central carrier bearing is not great. Hopefully the problem will be solved when both these parts are replaced. But before I put everything back, including heat shields and exhaust system I want to grease up the two central alignment bushes on each end of the prop. Can anybody advise on what grease to use? Thinking of some type that's possibly on the thick side (high viscosity) and long lasting. BTW, I don't know if it can been seen in the photos, the bushes actually have a seal built in to retain grease.
Thanks in advance.
Let's talk about grease! I sometimes get confused on what is what when it comes to choosing a suitable grease.
I've been chasing a driveline vibration and removed the propshaft for a proper inspection, found the Hardy Spicer is worn (notchy) and the Central carrier bearing is not great. Hopefully the problem will be solved when both these parts are replaced. But before I put everything back, including heat shields and exhaust system I want to grease up the two central alignment bushes on each end of the prop. Can anybody advise on what grease to use? Thinking of some type that's possibly on the thick side (high viscosity) and long lasting. BTW, I don't know if it can been seen in the photos, the bushes actually have a seal built in to retain grease.
Thanks in advance.
