v8ian
Posted a lot
Posts: 3,763
Member is Online
|
|
|
|
|
I have done plenty of injection conversions using Jenvey kit before, BUT.........I am the proud owner of a set of Direct to head 45mm Jenveys for my 20XE, what has me a touch confused is the lack of return capability, as the end of the fuel rail is blanked off from new, how do I plumb it up,? are there pressure regulators with return feeds built in?
|
| |
Atmo V8 Power . No slicks , No gas + No bits missing . Doing it in style.
Austin A35van, very different------- but still doing it in style, going to be a funmoble
|
|
ferny
Club Retro Rides Member
Posts: 984
Club RR Member Number: 13
|
fuel injection plumbing?ferny
@ferny
Club Retro Rides Member 13
|
|
|
|
Yep. Do I bit of Googling for "deadhead" systems and you'll get plenty of explanations and examples.
|
| |
|
|
|
|
|
Dec 10, 2022 10:04:34 GMT
|
|
Depends how you want to run the fuel system, its not a permanent dead head I take?
May be setup like this to suit the typical oem installation, fuel regulator at the tank end with a single line up.front
|
| |
|
|
