|
|
|
Hi all,
I've just got myself a 3D printer and I wondered if anyone would like me to make stuff for them?
Gifts, tools, parts for a car etc.
I can make new 3D models from drawings, I can have a crack at doing something from an explanantion and I love a challenge.
I'd have to charge cost for material, postage and a very small labour charge (unless the thing is teeny weeny then I might do it as a freebie [clarity: 1000 teeny weeny things are the same as a big thing so that'd be chargeable]).
Drop me a message, let me know.
I'm not looking to fleece anyone, just got a machine that can do a thing and a brain that thinks it can.
Cheers! L
|
|
|
|
|
|
|
|
ive always wanted to build one of these rick masks www.thingiverse.com/thing:1861871i couldn't even get a quote when i tried a few years ago could you print the parts if so how much cheers
|
|
|
|
|
|
|
Hahhah mental!
I'll PM you now
|
|
|
|
gezzard
Club Retro Rides Member
Posts: 613
Club RR Member Number: 69
|
3D Printing for RR Peeps...gezzard
@gezzard
Club Retro Rides Member 69
|
|
Afternoon, I was looking for BMW E36 cup holders on Amazon, eBay etc, and prices were quite high😟 But found the ideal one on thingiverse,and remembered I'd seen a thread on here about 3d printing, so I don't know if it's something you might be able to have a go at, it's these, but preferably black or dark grey? www.thingiverse.com/thing:2776049Cheers!
|
|
|
|
sonus
Europe
Posts: 1,386
|
|
|
Probably good to let people know what build volum you have I print mock ups of parts for my car before having them made in metall.
|
|
Current 1968 TVR VIXEN S1 V8 Prototype 2004 TVR T350C 2017 BMW 340i
Previous BMW 325d E91LCI - sold Alfa Romeo GTV - sold Citroen AX GT - at the breakers Ford Puma 1.7 - sold Volvo V50 2.0d - sold MGB GT - wrecked by fire MG ZT 1.8T - sold VW E-golf Electric - sold Mini Countryman 1.6D -sold Land Rover Discovery TD5 - sold
|
|
|
|
Jun 16, 2021 20:47:28 GMT
|
Afternoon, I was looking for BMW E36 cup holders on Amazon, eBay etc, and prices were quite high😟 But found the ideal one on thingiverse,and remembered I'd seen a thread on here about 3d printing, so I don't know if it's something you might be able to have a go at, it's these, but preferably black or dark grey? www.thingiverse.com/thing:2776049Cheers! I can have a crack at these sure. I have Orange PETG up at the moment so I can run you off on eof them if you want it urgent or if you're happy to wait until I start a black run (next material up) I can let you know?? Drop me a PM with the details.
|
|
|
|
|
|
Jun 16, 2021 20:48:26 GMT
|
Probably good to let people know what build volum you have I print mock ups of parts for my car before having them made in metall. VERY GOOD POINT Top Marks Currently I print inside a 180mm cube, bigger parts can be printed in bits an stitched together after
|
|
|
|
TessierAshpool
Club Retro Rides Member
Posts: 507
Club RR Member Number: 168
|
3D Printing for RR Peeps...TessierAshpool
@tessierashpool
Club Retro Rides Member 168
|
Jun 17, 2021 13:30:30 GMT
|
I've got a small front fairing for a moped, that is broken and I cannot obtain a replacement for. I wonder if that would be something you'd be interested in attempting? The fairing would originally have spanned the front forks - each side has a radius corner, then an angled flat section where the "CH" is in pic, then the front flat section where the rubbed out "IC" is, and then it should mirror on the other side. Originally the broken side would have had a slatted section (as the horn sits behind it), but that wouldn't have to be slatted. Pics might help: It's about 175mm wide, 83mm high originally. Thoughts on being able to recreate it? Thanks. Edit: Artist's impression of the original follows...
|
|
|
|
Keef
Part of things
Tell me about your ADO8, ADO44, ADO14, ADO16 or ADO17
Posts: 234
|
|
Jun 17, 2021 18:01:28 GMT
|
|
|
Last Edit: Jun 17, 2021 18:27:50 GMT by Keef
Keef - Sheerness Kent UK 1962 A40 Farina MkII Saloon (Yoko) 1965 VDP 1100 MkI Saloon (JJ) 1969 Austin Maxi 1500 (Wilma) 1974 Austin Maxi 1750 (Kory) 1979 Austin Morris Maxi 1750HL (Julie) 1979 Austin Maxi 1750HLS (Kevin) 1980 Austin Maxi 1750 (Mork) 1981 Austin Maxi 1750HL auto (InKOGnito) < www.flickr.com/photos/hk11_yah/albums > =========
|
|
|
|
Jun 18, 2021 13:38:59 GMT
|
I've got a small front fairing for a moped, that is broken and I cannot obtain a replacement for. I wonder if that would be something you'd be interested in attempting? The fairing would originally have spanned the front forks - each side has a radius corner, then an angled flat section where the "CH" is in pic, then the front flat section where the rubbed out "IC" is, and then it should mirror on the other side. Originally the broken side would have had a slatted section (as the horn sits behind it), but that wouldn't have to be slatted. Pics might help: It's about 175mm wide, 83mm high originally. Thoughts on being able to recreate it? Thanks. Edit: Artist's impression of the original follows... I'll send you a PM now
|
|
|
|
|
|
Jun 18, 2021 13:55:07 GMT
|
|
|
|
|
Keef
Part of things
Tell me about your ADO8, ADO44, ADO14, ADO16 or ADO17
Posts: 234
|
|
Jul 24, 2021 17:01:25 GMT
|
Any progress on the cupped washers please?
|
|
Keef - Sheerness Kent UK 1962 A40 Farina MkII Saloon (Yoko) 1965 VDP 1100 MkI Saloon (JJ) 1969 Austin Maxi 1500 (Wilma) 1974 Austin Maxi 1750 (Kory) 1979 Austin Morris Maxi 1750HL (Julie) 1979 Austin Maxi 1750HLS (Kevin) 1980 Austin Maxi 1750 (Mork) 1981 Austin Maxi 1750HL auto (InKOGnito) < www.flickr.com/photos/hk11_yah/albums > =========
|
|