My bedford has a level gauge for the fresh water tank. It works by capillary. There is a micro bore pipe from the tank up to a sight tube.
One day it just drained out to empty and hasnt worked since.
Ive took it apart and took the sender out the tank and i can find nothing wrong with it.
I can't find any info at all on line about these. I must be missing something about how it works.
Is anyone familiar with these?
The pipe isnt blocked or split, the air vent hole is clear.
I have tried filling it from the top and it all just syphons back down into the tank.
To me it looks like there should be something else in the sender that has somehow gone missing but i don't see how thats possible, or how it could have disappeared.
One day it just drained out to empty and hasnt worked since.
Ive took it apart and took the sender out the tank and i can find nothing wrong with it.
I can't find any info at all on line about these. I must be missing something about how it works.
Is anyone familiar with these?
The pipe isnt blocked or split, the air vent hole is clear.
I have tried filling it from the top and it all just syphons back down into the tank.
To me it looks like there should be something else in the sender that has somehow gone missing but i don't see how thats possible, or how it could have disappeared.
