dreadspeed
Part of things
1972 triumph 2.5 pi on carbs
Posts: 66 
|
|
|
|
Hi ive aquired an old Cebora Pocket Pulse Tig100 welding maching it is old not an inverter has a transformer in it, the reason i wanted one of these is its very basic just an on off switch, pulse dial and amp dial thats it no other complicated settings, ive got no flow regulator for it and no gas yet, although i am or was a coded arc welder plus oxy acetylene welder ive never had any thing to do with tig welding, if i attached the earth to a bit of steel plate turned it on and it struck up an arc does this mean its working ok ? i no i need gas and regulator just trying to test it really, also i don't have an instruction manual for it, Where can i get one?  |
| |
|
|
|
|
|
|
|
|
Cebora iirc were part of Kempi.Take it this model is scratch start and just a manual valve for gas flow.Always remember all tig welders are positive earth.Go over to one of the welding forums and see if anyone has a spare manual they will copy for you.
|
| |
|
|
slater
Club Retro Rides Member
Posts: 6,390
Club RR Member Number: 78
|
Cebora Pocket Pulse Tig100slater
@slater
Club Retro Rides Member 78
|
|
|
|
Is it HF start? That's the only thing I can think of that could be wrong with a machine like that.
|
| |
|
|
|
|
dreadspeed
Part of things
1972 triumph 2.5 pi on carbs
Posts: 66
|
|
May 18, 2019 16:21:08 GMT
|
|
Thanks droopsnoot iv now got the instructions i needed
|
| |
|
|
