|
|
|
Apr 22, 2019 16:10:03 GMT
|
just a quick one ladies and gents.. the hood skin on swmbo's '04 A4 cabrio is juuuust starting to show the typical issue of the hood beginning to come away from the rear screen over a couple of inches on the bottom left corner. wanting to sort it before it gets any worse i did the usual inteweb search to be greeted with the normal gamut of weird/wacky/obviously tosh laden ideas as to what product to use. my gut instinct says a PU adhesive such as puraflex (sikaflex as was) www.toolstation.com/puraflex-40-high-modulus-pu-sealant-adhesive-300ml/p85566 has anyone done a similar repair or offer any suitable alternatives? not posted a pic as not much to see. |
| |
'80 s1 924 turbo..hibernating
'80 golf gli cabriolet...doing impression of a skip
'97 pug 106 commuter...continuing cheapness making me smile!
firm believer in the k.i.s.s and f.i.s.h principles.
|
|
|
|
|
Apr 22, 2019 18:15:29 GMT
|
|
The best results I've had on my rear glass on the TT - which suffers the same problem - was using cheapo 2-pack Epoxy adhesive from whichever pound shop recently closed down. I've tried a few different silicon-type adhesives which came away after a short time, and this has lasted much longer so far. It's not entirely waterproof, however, so I have a drip tray under it when it's left.
|
| |
|
|
|
|
|
Apr 22, 2019 20:58:01 GMT
|
|
|
| |
|
|
