MS2 ECU | Retro Rides

baracus Part of things Posts: 179	MS2 ECU baracus @baracus
	Jul 23, 2018 8:18:55 GMT Select Post Deselect Post Link to Post Back to Top
	Fully built unit, currently configured for EDIS in, EDIS out and a PWM idle valve, but as you know these things can be reconfigured for just about anything petrol powered including rotary. Has firmware installed (& a Rover V8 map just to be ultra convenient for any lovers of the worlds finest engine ) £275 posted or collect Leeds. Ta.


	Reply Quote

JoshO Part of things Posts: 337	MS2 ECU JoshO @josho
	Jul 26, 2018 19:24:20 GMT Select Post Deselect Post Link to Post Back to Top
	Hey man, would it be possible to reconfigure it for a Mazda MX-5? I'm looking for another megasquirt for my car.


	Reply Quote

baracus Part of things Posts: 179	MS2 ECU baracus @baracus
	Aug 12, 2018 17:44:51 GMT Select Post Deselect Post Link to Post Back to Top
	Hey Josh, yep perfectly possible. You need to know what you want/how you want to run it, i.e. Individual coil on plug, batch fire coil packs, batch fire fuel, fully sequential etc so there is a bit of a learning curve. Plenty of good reading over at www.miataturbo.net/megasquirt-18/ If you can't solder, i can reconfigure it for you for a small fee, but you'll still need to tell me what config you need. Cheers


	Reply Quote