K Reg Honda Integra Type R DC2 £1800 West Yorkshire

You can upload them to Photobucket and then paste the IMG link.

Is it UKDM or JDM?

Just how rusty is this thing!?

You wouldn't get a DC2 Type-R on a K-Reg...

This thought did occur to me.

It is a DC2 model and all the rust/ welding for the MOT failure has been sorted welded, however the rest of the stuff on the mot still needs doing hence the price. I'm trying to reply to all messages via sms and whatssapp those who have whatsapped me.

finally managed to 2 pics on

Give you £80 for it?

Reason(s) for failure:

-Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
-Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
-Nearside Headlamp not working on dipped beam (1.7.5a)
-Offside Headlamp not working on main beam (1.7.5a)
-Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
-Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
-Nearside Rear Direction indicator incorrect colour (1.4.A.2f)
-Offside Rear Direction indicator incorrect colour (1.4.A.2f)
-Battery insecure (1.9.1)
-Horn not working (1.6.2a)
-Offside Registration plate lamp not working (1.1.C.1d)
-Nearside Registration plate lamp not fitted (1.1.C.1b)
-Nearside Steering rack gaiter split (2.2.D.2d)
-Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
-Offside Front front brake excessively fluctuating (3.7.B.3)
-Nearside front brake binding (3.7.B.1)
-Offside front brake binding (3.7.B.1)
-Exhaust has a major leak of exhaust gases (7.1.2)
-Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
-Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
-Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
-Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
-Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch (6.1.B.2)
-Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch (6.1.B.2)
-Nearside rear brake recording little or no effort (3.7.B.5a)
-Offside rear brake recording little or no effort (3.7.B.5a)
-Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
-Service brake: efficiency below requirements (3.7.B.7)
-Parking brake: efficiency below requirements (3.7.B.7)

98 was the earliest DC2 Type R’s were available in the UK, 96 in Japan, so definitely not K reg Type-R. Front bumper is not Type R either so suspect a lesser model with a Type R rear spoiler.
Intriguing car... why have all that expensive metalwork done and then sell it so cheap?