|
|
|
Dec 22, 2016 23:23:33 GMT
|
|
I'm after a range rover p38 2.5 diesel auto bell housing, torque converter, flywheel and spacer. Close to Bristol would be good Thanks Ryan
|
| |
RYZ Customs
|
|
|
|
|
Dec 25, 2016 12:25:16 GMT
|
|
The p38 diesel uses a zf4hp22 gearbox so a 3.9, 4.0 diesel will do however the diesel uses a different TC and flax plate that doesn't fit a rover v8 if you're looking for it to fit a rover v8? All bellhousing are the same 👍🏼
|
| |
|
|
|
|
|
Dec 25, 2016 23:00:19 GMT
|
|
Cheers dude Its to use the zf box on 2,5 bmw diesel motor
|
| |
RYZ Customs
|
|
|
|
|
|
|
|
TBH, probably cheaper to buy a complete box with b/h, TC etc 👍🏼
|
| |
|
|
|
|
|
Dec 26, 2016 23:19:13 GMT
|
|
If I could get one local bud I would, but postage on a complete box out weighs it. I think I'm going to need the input shaft from a 4x4 box but I got a mate with a couple of them kicking about.
|
| |
RYZ Customs
|
|
|
|
|
|
|
|
I have a scrap zf4hp22 RR box here that you can rob for bits, No bell housing tho
|
| |
|
|
|
|
|
Dec 27, 2016 11:30:28 GMT
|
The p38 diesel uses a zf4hp22 gearbox so a 3.9, 4.0 diesel will do however the diesel uses a different TC and flax plate that doesn't fit a rover v8 if you're looking for it to fit a rover v8? All bellhousing are the same 👍🏼 no it wont, the M51 has the starter on the left side, and sits canted over, V8 sits flat with starter on the right, very different bellhousing. |
| |
|
|
|
|
|
Dec 27, 2016 11:47:05 GMT
|
|
That's what I said, the v8s use same bell housing, TC and flex plate and the diesel is different
|
| |
|
|
|
|
|
|
|
|
ok guys thanks for your help I'm sorted now, but I might take you up on the offer of the bits off the scrap box if I need anything, Thanks
|
| |
RYZ Customs
|
|
|
|
|
|
|
ok guys thanks for your help I'm sorted now, but I might take you up on the offer of the bits off the scrap box if I need anything, Thanks No worries, I'm in Cheltenham 👍🏼 |
| |
|
|
