|
|
|
May 27, 2016 18:22:33 GMT
|
|
Hi folks just helping a mate with a 2000 Honda CR-V . He got it the other day and the seller said it needed a window motor on pass side. Fitted the motor and mechanism today but it's dead. Wired up the motor direct to a batty and it works. Swapped switch over and that was fine. Checked fuse fine. Took a live direct to feed wire and it arced. Seems all wires are connected to earth. Any ideas? Cheers Jed
|
| |
|
|
93fxdl
Posted a lot
Enter your message here...
Posts: 2,000
|
|
May 28, 2016 17:56:07 GMT
|
|
Have heard that a common problem with electric windows can be the wires breaking where they flex as the door opens and closes. Are the windows swtched on? Some cars have an isolator switch to stop kiddies/pets opening or closing the windows.
Could it be an earth switched system?
Ttfn Glenn
|
| |
Last Edit: May 28, 2016 17:57:32 GMT by 93fxdl
|
|
|
|
|
May 28, 2016 20:01:05 GMT
|
|
Thanks Glenn. Been fiddling with it all day. The car that is. I was changing both front window motors . I had tried the passenger one but no joy so in the end sacked it off and just did the drivers one. Then just had one last go at the pass side and it worked! Must have been a break in the drivers side feed for the pass side. It's slow though the gliders need lubing.
|
| |
|
|
