I have an ETB digidash currently fitted in the car and wired up. I was lead to believe this could connect to my Omex ECU for sensors but this is not the case and requires additional sensors fitted (speed, oil, water etc). I then bought a Race Technology Dash2 with relevant cable to connect to the Omex but this requires a loom to be made.
Anyway, electrics are not my strongpoint in the slightest, any advice on somewhere in the North East to get either of the two wired up and working correctly?
Anyway, electrics are not my strongpoint in the slightest, any advice on somewhere in the North East to get either of the two wired up and working correctly?