Mazda 323 3 door hatch 94-98 seats in good condition. I bought them to replace the front seats on my 323f 5 door, however whilst they bolt in fine, I found they sit around an inch or so higher. Great if you are short, but if you are anywhere close to 6 foot tall, it reduces headroom too much.
They may be perfect for a kit car or some other kind of project as the seat bases are flat and the subframes bolt to the seat. This means they can adapted with ease to fit anything you like, providing you have the headroom and width. Will get some approx measurements asap.
I paid £60 for them, but realise they are rather niche, so I guess I will have to take a bit of a hit on them. That being said, I would like to get as much money back as possible! If I can't get a reasonable amount back I will probably turn the front seats into desk chairs and bin the rest.
www.ebay.co.uk/itm/172117159839?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
They may be perfect for a kit car or some other kind of project as the seat bases are flat and the subframes bolt to the seat. This means they can adapted with ease to fit anything you like, providing you have the headroom and width. Will get some approx measurements asap.
I paid £60 for them, but realise they are rather niche, so I guess I will have to take a bit of a hit on them. That being said, I would like to get as much money back as possible! If I can't get a reasonable amount back I will probably turn the front seats into desk chairs and bin the rest.
www.ebay.co.uk/itm/172117159839?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
