|
|
|
I've had these laying about for a while now and really need to shift some old parts that I've collected over the years. TWO ONLY Compomotive wheels, 13", I'm unsure of the offset and centre bore. I can however give you a rough measurement(if I remember rightly they are 3.45"?) need a lick of paint. £25 collected? I have this photo only. I can send you more upon request.
|
|
|
|
b3nson
Part of things
Posts: 886
Club RR Member Number: 22
|
|
|
Can you measure the PCD please? Or know what they have fitted to previously?
|
|
Last Edit: Dec 8, 2015 19:31:41 GMT by b3nson
'99 Fiat Coupe 20V Turbo '08 Panda 100HP
|
|
|
|
Dec 10, 2015 13:41:42 GMT
|
Can you measure the PCD please? Or know what they have fitted to previously? Sorry mate I've just seen this. I can give you a rough measurement sure, bare with me and it'll be done by tonight. I'm not entirely sure what they was previously fitted on. They come with some compomotive splits I brought a while back, they was 3.45" too. Maybe that's why it sticks in my head so much
|
|
|
|
b3nson
Part of things
Posts: 886
Club RR Member Number: 22
|
|
Dec 10, 2015 17:24:57 GMT
|
Cool, thanks, Maybe a photo of the back side too if possible? they normally have some numbers around the mounting face. They're definitely the right size and style to what I want, just need to know if they'd fit!
|
|
'99 Fiat Coupe 20V Turbo '08 Panda 100HP
|
|
|
|
Dec 10, 2015 17:30:52 GMT
|
There is some info written on the lip by the looks of it....
|
|
|
|
b3nson
Part of things
Posts: 886
Club RR Member Number: 22
|
|
Dec 10, 2015 17:42:49 GMT
|
Yeah I believe that is just size, width and offset though
|
|
'99 Fiat Coupe 20V Turbo '08 Panda 100HP
|
|
|
|
Dec 10, 2015 22:05:34 GMT
|
Cool, thanks, Maybe a photo of the back side too if possible? they normally have some numbers around the mounting face. They're definitely the right size and style to what I want, just need to know if they'd fit! Okay, so I got the PCD which is 3.45". I have got some photos for you too. They're not amazing quality and my camera failed to pick up the writing inside. But I can double check to see what it says inside if you would like tomorrow. The photos, they aren't uploading, so I can pm them to you, text, whatsapp, whatever floats ya boat.
|
|
|
|
b3nson
Part of things
Posts: 886
Club RR Member Number: 22
|
|
Dec 13, 2015 20:03:10 GMT
|
Sorry just saw the reply. Can you PM me the photos please. You sure that PCD measurement is right? 3.45 doesn't seem right?
|
|
'99 Fiat Coupe 20V Turbo '08 Panda 100HP
|
|