I know what these are called but for the life of me I cannot remember the correct term.
Anyway I have picked up a set of Cobra TC Supaslots for my 1970 beetle project.
However some of the wheels have what look to be thick washers pressed into the bolt holes. I assume these are steel and serve to protect the alloy from the bolt.
However, one wheel has none, two wheels have 2 and one has just the one missing.
My question is, can I get replacements for them? Or do I remove them all and use a certain type of bolt with a swivel washer built in?
I really hope the wheels aren't scrap.
Not sure if you can see, but below is a picture.
Anyway I have picked up a set of Cobra TC Supaslots for my 1970 beetle project.
However some of the wheels have what look to be thick washers pressed into the bolt holes. I assume these are steel and serve to protect the alloy from the bolt.
However, one wheel has none, two wheels have 2 and one has just the one missing.
My question is, can I get replacements for them? Or do I remove them all and use a certain type of bolt with a swivel washer built in?
I really hope the wheels aren't scrap.
Not sure if you can see, but below is a picture.
