I have here a custom JAF Fabrication bias pedal box, with three Wilwood master cylinders, AP Racing reservoirs and bias adjuster.
Pedal box is brand new never even fitted, was a one off made for a kit car so not an off the shelf item. The quality is excellent, with poly bushed pedal arms, twin cylinder brake pedal and bell crank accelerator pedal. Far better than the curse word on ebay for the same price!
Master cylinders are all wilwood, there are 2x .75 and one .675. These were fitted to a car for mockup and have hardly seen any use, come with brand new push on fittings and original plugs.
Brand new remote bias adjuster, I bought this from McGill Motorsport a couple of months back for £40. Still has wrapping on adjuster.
Three AP Racing large capacity reservoirs with bellows, used but in excellent condition. All three have push on fittings, one is metal and removable.
I can also include about 3m or more of unused 8mm braided oil/fuel hose to connect the reservoirs to the master cylinders.
This lot has cost me a little over £500 and took ages to get together as I was very specific about the parts I wanted! I'm asking £350
Pedal box is brand new never even fitted, was a one off made for a kit car so not an off the shelf item. The quality is excellent, with poly bushed pedal arms, twin cylinder brake pedal and bell crank accelerator pedal. Far better than the curse word on ebay for the same price!
Master cylinders are all wilwood, there are 2x .75 and one .675. These were fitted to a car for mockup and have hardly seen any use, come with brand new push on fittings and original plugs.
Brand new remote bias adjuster, I bought this from McGill Motorsport a couple of months back for £40. Still has wrapping on adjuster.
Three AP Racing large capacity reservoirs with bellows, used but in excellent condition. All three have push on fittings, one is metal and removable.
I can also include about 3m or more of unused 8mm braided oil/fuel hose to connect the reservoirs to the master cylinders.
This lot has cost me a little over £500 and took ages to get together as I was very specific about the parts I wanted! I'm asking £350